MLT Cooling water monitor WSS16-S

Item number: MLT_18001>

EAN: 4064343344906

Category: Cooling Water Monitor

Manufacturer: MLT AG

Price on application

Product price on request.


MLT Cooling water monitor WSS16-S

Many distilleries contain substances which may spark spontaneously in contact with air and/or water. In the usual laboratory practice these are mainly the alkali metals and its hydrides. Particular caution is needed for distillation residues containing alkali metals. These must be cooled constantly by cooling water. At a breakdown of the cooling system of the cooling water, the heaters however continue to work and the distillery dries-out. This creates high fire and explosion hazard due to the alkali metal. With the Water Safety Switch WSS16 this risk is practically eliminated.

Operation of the cooling water monitor:
  1. The cooling water monitor WSS16-S controls the entire cooling water circuit.
  2. If the cooling water flow fails in the runback (due to a leak or a stoppage of the supply of cooling water) all by cooling water operated devices are turned off
  3. At the same time a solenoid valve stops the cooling water flow
  4. The cooling water runback is protected by an integrated non-return valve so that by a closed cycle cooling system the water cannot leave over a possible leak
  5. After elimination of the cooling water flow problem the system can be reset by a simple keystroke
Other pros:
  • The WSS16-S is easy to operate
  • The model WSS16-S can be mounted on a stand rod to save space
The following applications are supported in the laboratory:
  • Monitoring of cooling water circuits e.g. in distillation facilities

Shipping weight: 15,00 Kg
Product weight: 11,60 Kg
Model WSS16-S
Breaking capacity up to 16A (e.g. heating mantle)
Blocking valve 24V = (220-240V/50-60 Hz possible) for water flow
Flow monitor 0.5 - 3 l/min (other ranges on request) with non-return valve for water return
Dimensions (WxDxH) 80 x 120 x 110 mm
Weight 770 g