PC-KIT: Fast, easy and reliable and low operating costs- The KIRSCH-PC-KIT enables you to create the temperature documentation and to monitor (depending on the PC-KIT version) a KIRSCH refrigerator or freezer with a conventional PC.
State-of-the-art documentation
With the KIRSCH-PC-KIT, you can document and display up to 39 values which the control unit uses to operate the refrigerator/freezer. Operating costs are low because no recording discs are needed. Document for example:
- temperature profile measured by the sensor for controlling the temperature
- temperature profile measured by the sensor for the display
- data showing when the door was opened
- data showing when the device was in alarm mode etc.
State-of-the-art monitoring
Monitor live via PC-KIT-NET or PC-KIT USB-MONITORING the following functions of your KIRSCH device:
- actual temperature
- alarm messages
- ventilator
- compressor
- defrosting
The PC-KIT is optionally available in 3 different versions:
- PC-Kit-Net
- PC-Kit-USB-Monitoring
- PC-Kit-Stick
PC-KIT-NET: For electronic temperature documentation and monitoring in the network.
- live monitoring and temperature documentation via intranet and software KIRSCH-DATANET
- document and display up to 39 values which the control unit uses to operate the refrigerator/freezer, such as: temperature profile, door openings, alarm,...
- automatic documentation in DATANET, time interval adjustable
- change parameters of the fridge/freezer via your PC
- connect as many refrigerators and freezer in the network as required.
- up to three users can access a connected device at the same time.
- data recording up to 72 hours after a power failure.
- retrofitting possible
The main part of the PC-KIT-NET is the TCP/IP gateway. It is connected to the RS-485 interface on the KIRSCH refrigerator or freezer and installed in the plant room. Gateway and network port are connected using a Cat5 Ethernet cable. Each refrigerator and freezer needs its own TCP/IP gateway and a fixed IP address. In this way you can connect as many refrigerators and freezers in an existing network as required. Up to three users can access a connected device at the same time. Monitoring is also possible. The actual capture of the measurement data is done through the data logger board in the refrigerator or freezer electronic controller.
Refrigerators and freezers which feature an RS-485 interface can generally be retrofitted with the PC-KIT-NET.
Scope of supply:
- Temperature documentation software KIRSCH-DATANET
- Datalogger board
- TCP/IP gateway with shielded data and network cable
- Li-Ion battery
- Cat-5 data cable, 5 metres
- Attachment bracket with two self-cutting screws
- Grounding clip for data cable with fastening screw
Software Kirsch -DATANET:
KIRSCH-DATANET SOFTWARE PACKAGE: Our software KIRSCH-DATANET captures, evaluates and documents the recorded data. The recorded data can be exported to other programs and sent via email. Additionally, the program offers a monitoring function. The current interior temperature and alarm messages from the connected refrigerators and freezer are shown on screen. You can run the program in English, French or German.
