IKA Calorimeter C 1 Package 3/12, with heater, tap water, halogen resistant
The C 1 static jacket oxygen bomb calorimeter provides a high degree of automation and has the smallest calorimeter footprint available. It operates according to DIN 51900 and ISO 1928. The temperature readings are analyzed according to the classical isoperibol method of Regnault Pfaundler.
With the package 3/12 including C 1.20 water heater it is possible to operate the C 1 with drinking-quality tap water in a temperature range of 5 °C to 25 °C (water temperature < 21 °C; measuring mode 22 °C / water temperature > 21 °C; measuring mode 30 °C). A chiller is no longer required. The C 1.20 heater serves to maintain the correct temperature of the tap water, which must be connected to the heater at a maximum pressure of 6 bar/0.6 MPa. C 25 pressure regulating gauge is recommended as an accessory if the pressure is higher or cannot be maintained. Scope of delivery
- C 1 calorimeter
- C 1.12 combustion chamber
- C 1.20 water heater
The scope of delivery includes all parts necessary to set up the unit.
Additionally it includes wear parts and consumables for the first approximately 500 experiments including 25 calibrations.
The catalytic activated, halogen resistant combustion chamber C 1.12 is specifically designed for the combustion of samples that contain halogens and sulfur ( > 3 % ). It is equipped with the C 5010.5 large crucible holder and C 6 large quartz crucible.
C 1 Package 3/12