Systec horizontal floor-standing autoclave HX

Item number: SYST_24008

EAN: 4064343337939

Category: Systec

Manufacturer: Systec

Price on application
Type

There are variations of this item. Please select the variation you wish.


Horizontal, floor-standing autoclaves Systec H-Series
Systec HX, for all laboratory applications even for sophisticated state-of-the-art sterilization processes. With all possibilities to add additional options for process optimization to enable validatable sterilization to be carried out.

  • From the sterilization chamber separated steam generator integrated into the housing
  • Number of sterilization programs (up to ...) 100
  • Touchscreen operation
  • Password secured access rights for parameterization and for further security relevant interventions Connection to external steam supply
  • Pre-programmable automatic door opening at the end of a program
  • Additional PT-100 temperature sensor in the condense exhaust
  • RS232-, RS485-, USB- and Ethernet Interface for external data transfer (network-compatible)
  • Internal memory for documentation of up to 500 sterilization cycles
  • Start by clock, timer for programmable start time
  • Steam exhaust condensation, water cooled, thermostatic controlled
  • "Autofill" - Automatic de-mineralized water feed for steam generation
  • Special program for waste sterilization with pulsed heat-up for more effecient air exhaust
  • Temperature holding function after the end of program for liquids
  • Validation port
  • Special program for Durham-Tubes
  • Housing and basic frame construction out of corrosion resistant stainless steel
  • Prepared for subsequent rapid cooling installation
  • Prepared for subsequent installation of vacuum system
  • Prepared for subsequent drying installation
  • Calculation of FO value


optional:

  • Extension of temperature and pressure to 150 °C / 5 bar
  • Rapid cooling
  • Pre- and post-vacuum
  • Air exhaust filtration
  • Drying 'Superdry' (only in conjunction with an optional vacuum system)
  • PC-Software for extensive documentation (network-compatible)
  • Integrated Memory for data backup of up to 10.000 sterilization cycles and for transmission of process data to a PC via USB stick (Documentation Software is needed)

Design: horizontal
Width (autoclave): 930 mm
Pressure max. (autoclave): 4.0 bar
Height (autoclave): 1780 mm
Diameter of vessel: 740 mm
Height or depth of vessel: 500 mm750 mm1000 mm1250 mm
Power (autoclave): 18.0 kW
Vessel material: stainless steel 1.4571 (AISI 316 Ti)
Temperature max. (autoclave): 140°C
Depth (autoclave): 1035 mm1285 mm1535 mm1785 mm
Type Chamber dimensions
Ø x depth (mm)
Chamber volume (liters)
total / nominal
External dimensions
WxHxD (mm)
HX-210 740 x 500 280 / 210 930 x 1780 x 1035
HX-320 740 x 750 385 / 320 930 x 1780 x 1285
HX-430 740 x 1000 495 / 430 930 x 1780 x 1535
HX-540 740 x 1250 602 / 540 930 x 1780 x 1785

All Typs: Heating Power 18 kW, Electrical connections: 380 - 400 V, 50/60 Hz, 3-phase + neutral, 32 A