Systec Media preparators MediaPrep for 45 up to 120 litres

Item number: SYST_24011

EAN: 4064343337878

Category: Systec

Manufacturer: Systec

Price on application
Type

There are variations of this item. Please select the variation you wish.


Systec Media preparators MediaPrep for 45 up to 120 litres. Prepare and sterilize microbiological media. Fast, accurate and easy to handle.

Here also locking of the door and loading hatch is dependent on temperature and pressure. Accidental opening is not possible! The inner vessel is just as convenient to exchange, to remove and to clean. These large vessels are also so equipped and controlled that they can be used as normal autoclaves.

The powerful heating elements are adapted to the size of the vessel and hence facilitate rapid heating. Rapid cooling is the same as in the smaller vessels with water circulation and support pressure directly at the external walls by means of sterilized and demineralized water brought to cooling temperature using a plate heat exchanger with a water connection. The support pressure avoids an overboiling respectively foaming of the media. The air compressor is built-in.

An automatic process guarantees uniform, high and reproducible quality of the prepared and sterilized media. The entire process - from initial heating to mixing and sterilization at a set temperature to cooling - is microprocessor-controlled. In addition, the temperature to be maintained after sterilization can be pre-selected.

Operation is via a front panel with a large, easy-to-read display. Every Systec MediaPrep has an interface for a PC; special software enables comprehensive documentation to be prepared. MediaPrep can be optionally fitted with an integrated printer for recording process documentation or with a SD memory card.

The filling port for additives subsequent to sterilization is generously dimensioned and has a safety lock. Sterile additives can be added via the open port with the help of a Bunsen burner or via a silicone septum using a syringe.

A fixed screw connection guarantees safe and sterile dispensing of the media.

The processed and sterile medium is dispensed via a flexible tube. The inner aspiration tube and dispensing port are also sterilized by steam during each sterilization process. The part of the tube outside of the instrument and the connected dispensing adapter must be separately sterilized using a suitable steam-sterilization procedure and connected to the dispensing port under sterile conditions.

Multi-function pump Dosierfix. This system is characterized by a high degree of precision and high speed. The dosing volume can be selected from 0.1 up to 999 ml. The system operates accurately to ± 0.5 %. Its automatic calibration function by means of a sample dosing guarantees reproducible results.

Automatic tube valve. An economical method for dispensing. Whilst a pre-selectable constant slight excess pressure in the media vessel promotes flow, MediaPrep controls the opening and closing of the pinch valve. Once the desired volume has been entered, MediaPrep carries out a sample dosing operation and calibrates itself based on the viscosity of the media.


Design: verticalmedia preparator
Width (autoclave): 550 mm650 mm
Height (autoclave): 1000 mm1030 mm1130 mm1160 mm
Diameter of vessel: 400 mm500 mm
Height or depth of vessel: 488 mm615 mm693 mm795 mm
Power (autoclave): 20.0 kW
Depth (autoclave): 775 mm895 mm
Volume (autoclave): 62 l88 l123 l158 l
Type Mediaprep-45 Mediaprep-65 Mediaprep-90 Mediaprep-120
Dimensions (L x W x H) in mm 550 x 775 x 1000 550 x 775 x 1130 650 x 895 x 1030 650 x 895 x 1160
Chamber dimensions Ø x H in mm 400 x 488 400 x 693 500 x 615 500 x 795
Chamber volume in litres 62 88 123 158
Inner vessel dimensions Ø x H in mm 366 x 452 366 x 657 467 x 572 467 x 752
Inner vessel volume in litres 47 69 98 129
Wattage in kW 20 20 20 20

All types: voltage 380 - 400 V, 50/60 Hz, 32 A
Modifications to other voltage as well as single phase operation available on request.


Accessories


Related products