Dimensions (H x W x D) (centrifuges):
|
460 x 570 x 616 mm
|
Acoustic signal, switchable:
|
yes
|
Display speed / g-force:
|
speed and g-force
|
Display shows dimensions:
|
yes
|
Acceleration max.:
|
Rotor 12158: 54 sRotor 12110: 37 s
|
Linear acceleration curves:
|
10
|
Acceleration curves, quadratic:
|
10
|
Deceleration and brakeless:
|
Combination from 1000 - 150 rpm selectable
|
Deceleration curves, linear:
|
10
|
Deceleration curves, quadratic:
|
10
|
Deceleration max.:
|
Rotor 12158: 57 sRotor 12110: 57 s
|
Continous run:
|
yes
|
Lid release / lid open:
|
Auto lid open, switchableAuto lid release at the end of the run, switchable
|
Display (centrifuges):
|
TFT
|
Speed max.:
|
30000 rpm
|
Speed min.:
|
100 rpm
|
Speed increments (Centrifuges):
|
10; 1 rpm
|
Calculation for liquid density:
|
>1.2 g/cm3
|
User defined acceleration curves:
|
10
|
User defined deceleration curves:
|
10
|
Brakeless:
|
yes
|
User defined program name:
|
yes
|
Capacity of vessels:
|
0.2 ml0.25 ml0.4 ml1.5 ml2 ml4 ml5 ml7 ml10 ml15 ml30 ml50 ml80 ml85 ml100 ml
|
Noise level at max. speed:
|
Rotor 11390: 59 dB (A)Rotor 12158: 63 dB (A)
|
Weight without rotor:
|
100 kg
|
Height with open lid:
|
890 mm
|
Capacity/capacity max.:
|
6 x 85 ml
|
Kinetic energy max.:
|
43753 Nm
|
Short run:
|
yes
|
Cooling, heating:
|
heatingcooling
|
Run monitoring:
|
yes
|
Power consumption (centrifuges):
|
1260 W
|
Max. radius decreaseable :
|
yes
|
Microprocessor controlled:
|
yes
|
Optical display stillstand:
|
yes
|
Permanent display preselected, current values:
|
yes
|
Programmes (centrifuges):
|
60
|
Rotors, pre programmed:
|
All rotors pre programmed speed, g-force, radius
|
Rotor temperature min.:
|
Rotor 12158 at 22,000 rpm: Rotor 11190 at 5,000 min rpm: Rotor 12158 at 22,000 rpm: less than 4 °CRotor 11190 at 5,000 rpm: less than 0 °C
|
Rotor type:
|
MTP rotorspecial rotorPCR rotorswing-out rotorangle rotor
|
Fast cool program:
|
Rapid temp
|
G-force increments:
|
10;1 xg
|
Safety (centrifuges):
|
4-digit code protection, free selectableStart refused with exceeded temperature tolerance, tolerance preselectablePop up window end of rotor life time
|
Signal length preselectable:
|
yes
|
Start delay:
|
yes
|
Controller (Centrifuges):
|
Control unit lockable
|
Standstill heating, switchable:
|
yes, yes
|
Temperature increments:
|
1 °C
|
Switchable °C, °F:
|
yes
|
Time setting range:
|
10 sec - 99h 59min
|
Time increments:
|
60; 1 s
|
Timing after:
|
set speed has been reached, switchable
|
Centrifuge type:
|
universal centrifuge
|
Shipping weight: |
140,00 Kg |
Product weight: |
102,00 Kg |