SIGMA 6-16HS heated centrifuge

Item number: SIGMA_22024

EAN: 4064343361767

Category: Centrifuges, Centrifuges with vortex function

Manufacturer: Sigma Laborzentrifugen

starting from 10.428,00 €

Manufacturer’s suggested retail price: 10.428,00 €

Excluding 19% VAT. , plus shipping (Sperrgut)

(including 19% VAT. 12.409,31 €)

Accessories Please select the accessories you need

Request for quote

Professional service

+49 30-403 667 940

International shipping

SIGMA 6-16HS heated centrifuge

Heated version of SIGMA 6-16S
Max. rotor temperature +60°C
Special for ASTM crude oil centrifugation max. +70°C
Universal table top centrifuge
Speed range up to 13.500 rpm
Control unit Spincontrol S
Various angle and swing-out rotors available
Lid can easily be opened due pneumatic swing support
Maximum capacity of 4 x 800 ml down to microtubes with different adapters in the same bucket
Maintenance-free induction drive motor A Microcontroller controls speed or gravitational field, time
2 Motorized lid locks
Suitable for low speeds e.g. for cell sedimentation, accuracy +/- 1 rpm
Magnetic rotor identification prevents the rotor from overspeeding
Stainless steel bowl
Imbalance switch
No need to open the casing for emergency lid lock release
Produced according to national and international safety regulations (e.g. EN 61010-2-020)
Window in the centrifuge lid for external speed control
Backlighted keys for start, stop, lid open

Rotor is not included in scope of delivery. Please order separately!

Dimensions (H x W x D) (centrifuges):	483 x 581 x 711 mm
Acoustic signal, switchable:	yes
Display speed / g-force:	speed and g-force
Display shows dimensions:	yes
Acceleration max.:	Rotor 11650: 29 sRotor 12600: 144 sRotor 13650: 29 s
Linear acceleration curves:	10
Acceleration curves, quadratic:	10
Deceleration and brakeless:	Combination from 1000 - 150 rpm selectable
Deceleration curves, linear:	10
Deceleration curves, quadratic:	10
Deceleration max.:	Rotor 11650: 34 sRotor 12600: 149 sRotor 13650: 34 s
Continous run:	yes
Lid release / lid open:	Auto lid release at the end of the run, switchableAuto lid open, switchable
Display (centrifuges):	TFT
Speed max.:	13500 rpm
Speed min.:	100 rpm
Speed increments (Centrifuges):	10; 1 rpm
Calculation for liquid density:	>1.2 g/cm3
User defined acceleration curves:	10
User defined deceleration curves:	10
Brakeless:	yes
User defined program name:	yes
Frequency (Centrifuges):	50/60 Hz
Capacity of vessels:	0.2 ml0.4 ml0.5 ml0.75 ml1.5 ml2 ml4 ml5 ml7 ml10 ml12 ml15 ml25 ml30 ml40 ml50 ml80 ml85 ml100 ml125 ml150 ml175 ml200 ml250 ml430 ml500 ml680 ml800 ml
Noise level at max. speed:	Rotor 11650: 73 dB (A)Rotor 12600: 73 dB (A)Rotor 13650: 73 dB (A)
Weight without rotor:	116 kg
Height with open lid:	990 mm
Capacity/capacity max.:	4 x 800 ml
Kinetic energy max.:	106950 Nm
Short run:	yes
Cooling, heating:	heating
Run monitoring:	yes
Power consumption (centrifuges):	2000 W
Max. radius decreaseable :	yes
Microprocessor controlled:	yes
Optical display stillstand:	yes
Permanent display preselected, current values:	yes
Programmes (centrifuges):	60
Rotors, pre programmed:	All rotors pre programmed speed, g-force, radius
Rotor type:	swing-out rotorMTP rotor
G-force increments:	10;1 xg
Safety (centrifuges):	4-digit code protection, free selectableStart refused with exceeded temperature tolerance, tolerance preselectablePop up window end of rotor life time
Signal length preselectable:	yes
Voltage (centrifuges):	220 - 240 V
Start delay:	yes
Controller (Centrifuges):	Control unit lockable
Temperatur setting range:	to + 70 °C
Temperature increments:	1 °C
Switchable °C, °F:	yes
Time setting range:	10 sec - 99h 59min
Centrifuge type:	universal centrifuge
Time increments:	60; 1 s
Timing after:	set speed has been reached
Counting cycles:	Counting cycles centrifuge, each rotor
Shipping weight:	148,00 Kg
Product weight:	118,00 Kg

Model	SIGMA 6-16HS
Power supply	220-240 V, 50/60 Hz
Power consumption [W]	2000
Max. capacity [ml]	4 x 800
Max. speed [rpm]	13500
Min. speed [rpm]	100
Interference suppression	EN 61326
Height x Width x Depth [mm]	483 x 581 x 711
Height with open lid [mm]	990
Weight without rotor [kg]	116
Kinetic energy max. [Nm]	106.950
Noise level at max. speed (approx.) - Rotor 11650 + 13650 - Rotor 12600	73 dB(A) 73 dB(A)
Max. acceleration - Rotor 11650 + 13650 [sec] - Rotor 12600 [sec]	29 144
Max. deceleration - Rotor 11650 + 13650 [sec] - Rotor 12600 [sec]	34 149
Temperatur setting range	+70°C

Display	TFT
Plain text pop up windows	+
Permanent display preselected, current values	+
Display shows dimensions	+
Timer	10 sec - 99h 59min
Timing after set speed has been reached	+
Time increments [sec]	60; 1
Short run	+
Continous run	+
Speed increments [min -1]	10; 1
Display speed and g-force	+
G-force increments [xg]	10; 1
Temperature increments [°C]	1
Switchable	°C, °F +
Start refused with exceeded temperature tolerance, tolerance preselectable	+
Programs	60
User defined program name	+
Program list shows all parameters	+, +
Linear acceleration curves	10
Quadratic acceleration curves	10
User defined acceleration curves	10
Linear deceleration curves	10
Quadratic deceleration curves	10
User defined deceleration curves	10
Brakeless	+
Combination deceleration a. brakeless from 1000 - 150 rpm selectable	+
Auto lid open, switchable	+; +
Accoustic signal, switchable	+; +
Signal length preselectable	+
Optical display stillstand	+
Counting cycles centrifuge, each rotor	+; +
Pop up window end of rotor life time	+
Automatic lid opening at the end of the run, switchable	+; +
All rotors pre programmed speed, g-force, radius	+
Max. radius decreaseable	+
Calculation for liquid density >1.2 g/cm3	+
Start delay	+
Controlunit lockable	+
Code protection	+
Run monitoring	+
Microprocessor controlled	+