Miele Cleaning and disinfecting machine PG 8527

• Freestanding appliance, building-in width 1150 mm
• Single lift-up door
• Spaceframe construction/Frame in 1.4016 grade stainless steel
• External casing in 1.4301 grade stainless steel, grain brushed to 220 grade
• Double insulated for optimum heat and noise absorption

• Freely programmable Profitronic + controls
• 64 programme places
• 12 standard programmes, 17 service programmes, 35 free programme places

• Inorganic
• Organic
• Lab Standard
• Lab Universal
• Lab Intensive
• Plastic
• Vario TD
• Special
• Sanitizing
• Mini
• DI-Rinise
• Drying

• 4 RS 232 interfaces wtih RJ 45 plugs
• 1 RS 232 interface with 9 pole SUB-D plug
• 1 Ethernet network interface with RJ 45 plug for connectionto process documentation software

• Remote service compatible

• Perfect Fine Filter: Special Filter System, which catches all particles up to 0.2 mm
• Flow meter counter for control of water intake
• Optional*: Boiler for heating demin. water (must be ordered additionally)
• Boiler capacity: 30 l
• Spray arm monitoring
• Monitoring of dosage volume
• Optional*: integrated conductivity measurement
• Electrical door lock
• Peak-load cut-out
• Sensors for automatic mobile unit recognition
• Programme failure check
• 2 spare sensors for temperature monitoring and control
• Comprehensive safety features in accordance with EN ISO 15883
• Sensor port
• Main switch on unclean side
• Optional*: full glass door
• Optional*: ORTHOVARIO equipment
• Optional*: Printer - built-in (not combinable with scanner)
• Optional*: port scanner with scanner (not combinable with printer)
• Optional*: steam condenser heat exchanger

Cleaning technology

• Hygienic freshwater system with water change after each cleaning phase
• Cleaning, disinfection and drying in a closed system
• Thorough surface cleaning of intruments via 2 spray arms
• Injector system for thorough cleanig of hollow instruments

• Useable dimensions [mm]: H 675, W 650, D 800
• Useable volume [l]: 332
• Stainless steel grade 304 / 1.4301
• Optional* Stainless steel grade 316L / 1.4404
• Cabinet wall thickness [mm]: 1.25

• 2 high performance circulation pumps, Qmax. 400/600 l/min

• 2 integrated bellows pumps for cleaning and neutralising agent
• Optional*: 3 additional dispenser pumps ( Please specify when ordering whether provided for cleaner, neutralizing agents or chemical disinfectants.)
• Capacity for 4 x 10 litre containers

• Optional*: Drying unit/side channel condenser, temperature adjustable from 60-115°C and time from 1-240 minutes
• Air throughput [m3]: 250
• Electric heated
  • voltage 3 AC 200-208V 50-60 Hz
  • heater rating [kW]: 2 x 4
  • fan rating [kW]: 2 x 0.9
  • total connected load [kW]: 10
• 1 pre-filter class EU4
  • filtration rate > 95%
  • filter life [h]: 200
• 4 particle filters class H 13
  • filtration rate > 99.992% (DIN EN 1822)
  • filter life [h]: 1000

• 1 x cold water 2-10 bar
• 1 x hot water 2-10 bar
• 1 x DI water 2-10 bar
• 3 inlet hoses 1/2" with 3/4" threaded union, inlet hoses 170 cm long
• Dump valve DN 50, on-site odour trap
• Optional*: 2 drain pumps DN 22, on-site odour trap, drain hose 125 cm long

• Type of heating : electric
• Heating type: steam / electric convertible
• 3N AC 400V 50Hz, Heating [kW ]: 18, Total connected load with EL or without TA [ kW ]: 20, Fuse rating [ A]: 3 x 32
• 3N AC 400V 50Hz, Heating [kW ]: 18, Total connected load with EL or without TA [ kW ]: 20, Fuse rating [A ]: 3 x 32 Steam connection G 1/2" (DN 10), operating pressure with TA EL [ bar]: 2.5-10, operating pressure with TA D [ bar]: 2.5-6, compressed air [bar ] : 6-12
• 3N AC 400V 50Hz, Heating [kW ]: 8 ( with TA EL ), total connected load with EL [kW ]: 9, Total connection without TA [ kW]: 2.1, Fuse [A ] 3 x 16 Steam connection G 1/2" (DN 10), operating pressure with TA EL [ bar]: 2.5-10, operating pressure with TA D [ bar]: 2.5-6, compressed air [bar ] : 6-12

Dimensions/weight

• H (incl. SBW+MAV) 95, W 45, D 34 inch
• Weight approx. 1257 lbs

• Plinth on rollers SBWR
• Plinth SBW (with service cut-outs)
• MAV cladding
• Top cover for MAV
• Printer for process documentation
• Mieltransfer MF 27/28