WLD-TEC Laboratory Gas Burner Fuego SCS

WLD-TEC Autoloop Pro for Fuego SCS Series

Fully automated carrousel for flame sterilizing inoculation loops. The inoculation loop carrousel Autoloop PRO, which is suitable for up to 4 inoculation loops, was developed to comply with current requirements in microbiological, cellbiological and biotechnological laboratories.

Modern Design
The stable housing enables comfortable and easy access to inoculation loops. Removal positions on both sides make the carrousel equally suitable for right and left handers.

Saves Energy, Time and Costs
Precise flame sterilization time extends the life of the inoculation loops and reduces gas consumption. Continuous working during the flaming and the cooling phases of the inoculation loops saves up to 70% of time and makes it possible to work efficiently.

More Comfort
Keep all functions in view with the fully graphic display. The graphic menu control makes it easy to select all functions quickly. Flaming and cooling time can be adjusted to the second. During the flame sterilizing, the display shows the remaining flaming time. The Autoloop PRO rotates and controls flaming automatically. No unintentional use of hot inoculation loops: When flaming is completed, the display shows the remaining cooling time and the removal positions of cool inoculation loops. All the suspended inoculation loops can be flamed as needed in one full rotation of the carrousel. For additional flame sterilisation (e.g. of bottle necks or test tubes) a foot pedal can be activated during the automatic operation.

More Safety
The nearly perpendicular position of the inoculation loop holder protects even the sleeve nut of the holder from possible contaminations. Additionally, an intelligent sensor of the Autoloop PRO monitors safe sterilization.

Robust
Fabricated entirely of stainless steel, anodized aluminium and a display, protected by heat resistant glass, the Autoloop PRO can withstand extreme laboratory conditions.

Less is more
The low gas consumption and the large savings in time set new standards for the laboratory.

The range:

• Autoloop Pro
• Fully graphic display
• 4 inoculation loop holders
• 4 inoculation loops
• Pedestal
• Instruction manual

Laboratory gas burner is not included.

Spray protector for Autoloop Pro & Ecoloop for more safety when handling pathogenic material.

Inoculation loop holder made from stainless steel with sleeve nut, colour coded, for inoculation loops with wire diameter 0.6 - 1 mm. Autoclavable.

Length: 245 mm
Pack = 4 pieces

Inoculation loop holder made from stainless steel with sleeve nut, colour coded, for inoculation loops with wire diameter 0.6 - 1 mm. Autoclavable.

Length: 215 mm
Pack = 4 pieces

Wire Ø 0.6 mm
Pack= 10 pieces

Wire Ø 0.6 mm
Pack= 10 pieces

Wire Ø 0.6 mm
1 pieces

Wire Ø 0.6 mm
1 pieces

Wire Ø 0.6 mm
1 pieces

Spray protector for Fuego SCS Series and Gasprofi Series. For more safety when handling pathogenic material.

Windshield for Fuego SCS Series and Gasprofi Series. For a stable flame under conditions of strong air flow.

Sterilizeable Tray in which to place your instruments while you work. Made of stainless steel, 3 places. For right, left or rear side.

Burner head made of stainless steel, with double lengh for easy heating of Erlenmeyer flasks.

Quadrupod 155 x 155 x 210 mm (L x W x H)

Ceran cover plate 155 x 155 mm (L x W)

Sterilizeable Tray

Mobile tray for instruments, 5 places. Made of stainless steel.

Wireless Foot Pedal for Safety Laboratory Gas Burners

Simple Operation
Wireless and safe flame sterilization! The new Wireless-Series ?RF? offers cable-free foot pedal operation for laboratory gas burners. Simply plug the RF-Stick into the safety laboratory gas burner and the burner can be controlled with the battery operated radio foot pedal.

Safe connection
The specially developed safety protocol of the RF-Series ensures reliable radio communication between foot pedal and laboratory gas burner. Furthermore, the automatic channel selection enables parallel use of multiple RF-Stick systems.

Persistent
The power-saving RF technology ensures maximum battery life for the battery operated foot pedal. The RF-Stick is powered directly by the laboratory gas burner.

The range:

• with stainless steel foot pedal (battery operated)
• 2 AA batteries (Mignon)
• RF-Stick for laboratory gas burner
• Instruction manual

Technical Data:

• Radio Frequency System
• Range: 2 - 5 m
• Frequency: 2.4 GHz
• Channels: 253
• Batteries foot pedal: 2 x AA (Mignon)
• Life time batteries (foot pedal): approx. 2000 hours (operation 8 hours per day: > 1 year)
• Power supply RF-Stick: via laboratory gas burner
• Licenses: CE: EN 301489 -3, EN300440 -1 -2, ECC guidelines: 2004/108/EC, 73/23/(EWG)ECC, 1999/5/EG (R&TTE)

Foot pedal made of plastic allows hands to be free for other tasks. Cable length 3 m.

External IR-motion sensor made of stainless steel. For a touch-free flame activation.

Gas-Safety Adapter 360 for Fuego SCS Series and Gasprofi 1 micro Series.

With integrated pressure regulator for cartridges CV 360, 52 g from Camping Gaz. Continuous cartridge operation 45 minutes.

Gas-Safety Adapter 470 for gasprofi and Fuego Series.

With integrated pressure regulator, shut-off valve, gas leak protection stainless steel stand and DVGW tubing (0.5 m) for cartridges CV 470, 450 g or CV 270, 230 g from Camping Gaz. Continuous cartridge operation 370 minutes.

Gas-Safety adapter 206 for gasprofi and Fuego Series.

With integrated pressure regulator, shut-off valve, gas leak protection and DVGW tubing (0.5 m) for cartridges C 206, 190 g from Camping Gaz. Continuous cartridge operation 150 minutes.

Gas-Safety Adapter 250 for gasprofi and Fuego Series.

With integrated pressure regulator, overheating protection, stainless steel stand and DVGW tubing (0.5 m) for cartridges CP 250, 250 g from Camping Gaz. Continuous cartridge operation 210 minutes.

DVGW low pressure regulator DIN 4811-4, for household liquid gas installation, with overpressure-, temperature- fuse & manometer, for gas bottles up to 14 kg

Tubing deflector for front side gas connection.

90 degree connection for sidewise tubing connection.

DVGW-Safety tubing for push-fit connection, lengh 0.5 m

DVGW-Gas tubing DIN 30664 part 1 for push-fit connection, lengh 0.5 m, with 2 tubing clips

DVGW-Safety tubing for threaded screw connection lengh 0.5 m

CG1750 gas cartridge, 170 g butane gas with valve

pack = 4 pieces

Only available in the following countries: Benelux, Danmark, Germany, France, Norge, Austria, Poland, Portugal, Switzerland, Slovenia, Spain.
In addition, a dangerous goods surcharge of € 12,00 will be charged.

CV360 gas cartridge, 52 g butane gas with valve

pack = 6 pieces

Only available in the following countries: Benelux, Danmark, Germany, France, Norge, Austria, Poland, Portugal, Switzerland, Slovenia, Spain.
In addition, a dangerous goods surcharge of € 12,00 will be charged.

CP250 gas cartridge, 250 g butane gas with valve

pack = 6 pieces

Only available in the following countries: Benelux, Danmark, Germany, France, Norge, Austria, Poland, Portugal, Switzerland, Slovenia, Spain.
In addition, a dangerous goods surcharge of € 12,00 will be charged.

C 206 gas cartridge, 190 g butane gas without valve

pack = 3 pieces

Only available in the following countries: Benelux, Danmark, Germany, France, Norge, Austria, Poland, Portugal, Switzerland, Slovenia, Spain.
In addition, a dangerous goods surcharge of € 12,00 will be charged.

CV 300 gas cartridge, 240 g butane gas with valve

pack = 3 pieces

Only available in the following countries: Benelux, Danmark, Germany, France, Norge, Austria, Poland, Portugal, Switzerland, Slovenia, Spain.
In addition, a dangerous goods surcharge of € 12,00 will be charged.

CV 470 gas cartridge, 450 g butane gas with valve

pack = 2 pieces

Only available in the following countries: Benelux, Danmark, Germany, France, Norge, Austria, Poland, Portugal, Switzerland, Slovenia, Spain.
In addition, a dangerous goods surcharge of € 12,00 will be charged.

With the new temperature regulation system and an temperature sensor, the Fuego SCS / Fuego SCS pro becomes a temperature-control station.

• Immersion sensor Ø 3 mm with handle, sensor length 130 mm, helix connection cable

Only usable in combination with the measuring adapter. Temperature range from +35°C to +350°C

With the new temperature regulation system and an temperature sensor, the Fuego SCS / Fuego SCS pro becomes a temperature-control station.

• Immersion sensor Ø 1.5 mm, sensor length 150 mm, bendable, cable length 2 m

Only usable in combination with the measuring adapter. Temperature range from +35°C to +350°C

With the new temperature regulation system and an temperature sensor, the Fuego SCS / Fuego SCS pro becomes a temperature-control station.

• Air sensor, PTFE insulated, cable length 1 m

Only usable in combination with the measuring adapter. Temperature range from +35°C to +350°C