GFL Incubation/Inactivation Bath 1105 - ProfiLab24 GmbH
99
100
24
4
stars -
Professional service
Customer
Young team with a lot of ambition and quick answers to all questions. We needed a complete laboratory equipment for our new location. The team of Profiab24 has arranged everything.
GFL Incubation/Inactivation Bath 1105 in Heating Baths, Water Baths
Item number: GFL_20021>
EAN: 4064343032544
Category: GFL
Manufacturer:
GFL
GFL Incubation/Inactivation Bath 1105. Order at ProfiLab24 Online catalog for laboratory equipment. Top service. Secure payment.
GFL Incubation/Inactivation Bath 1105
The Water Bath is successfully used for heating up medical compresses/hot packs as well as for incubations and inactivations of cultures, e. g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.
Specifications and features
- Large high-contrast TFT-colour display with clear readout of all process data.
- Microprocessor-controlled temperature regulation.
- The Water Bath is especially made to heat up medical compresses and hot packs.
- Excellent temperature constancy: ± 0.1 °C temporal at 50 °C.
- Soft-touch keys with characteristic symbols.
- Setting and displaying of temperature values in 0.1 °C increments as well as timer values in hours (h) and minutes (min).
- Timer with three functions:
- Switch-on delay of temperature control 0:00 to 999:59 h:min.
- Operating time after expiry of switch-on delay from 0:01 to 999:59 h:min or continuous.
- Operating time after expiry of switch-on delay and reaching the set point temperature from 0:01 to 999:59 h:min or continuous operation.
- Separate menu items: temperature limits min/max, over/under temperature alarm up to +/- 10 K, switchover °C/°F and for a process-dependent temperature adjustment.
- Visual and acoustic alarm in case of water shortage, over/under temperature and sensor break/short circuit.
- Electronic monitoring; in case of fault, cause is reported on display.
- Two independently working over-temperature protections.
- Heating element, bath interior, cover, lid and perforated tray made of stainless steel.
- Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.
- Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.
- Cover and perforated tray included as standard scope of supply. Water bath 1005 is supplied without perforated tray when ordered with rack 1923 (accessory).
- Drain cock at the back of the bath.
Width (heating bath):
|
510 mm
|
Heating bath model:
|
water/fluid bath
|
Heating bath temperature max.:
|
100°C
|
Heating bath volume:
|
41 l
|
Height (heating bath):
|
465 mm
|
Cooling:
|
no
|
Power (heating bath):
|
1500 W
|
Depth (heating bath):
|
490 mm
|
Shipping weight: |
26,40 Kg |
Product weight: |
21,40 Kg |
Dimensions: |
× × cm |
GFL Incubation/Inactivation Bath 1105 |
|
Temperature range |
approx. 5 °C above ambient temperature to +100 °C (boiling mode) |
Temperatur range (operation with water level regulator) |
approx. 3 °C above tap water temperatur to +100 °C |
Capacity |
approx. 41 l |
Interior dimensions (W x D x working height) |
410 x 296 x 335 mm |
Exterior dimensions (W x D x H) |
510 x 490 x 465 mm |
Electrical connection |
230 V / 50...60 Hz / 1,5 kW * |
Net / gross weight |
approx. 21.4 / 26.4 kg |
Packing volume |
approx. 0.345 m3
|
* Other voltages and frequencies on request