GFL Incubation/Inactivation Bath 1113

Item number: GFL_20024>

EAN: 4064343032513

Category: GFL

Manufacturer: GFL

Price on application


GFL Incubation/Inactivation Bath 1113

The Water Bath is successfully used for incubations and inactivations of cultures, such as e.g. for warming bacteriological media, processing chemical reactions or thawing frozen samples.

Specifications and features
  • Large high-contrast TFT-colour display with clear readout of all process data.
  • Microprocessor-controlled temperature regulation.
  • Excellent temperature constancy: ± 0.1 °C temporal at 50 °C.
  • Optimal temperature uniformity in the whole bath through built-in circulation system.
  • Soft-touch keys with characteristic symbols.
  • Setting and displaying of temperature values in 0.1 °C increments as well as timer values in hours (h) and minutes (min).
  • Timer with three functions:
    • Switch-on delay of temperature control 0:00 to 999:59 h:min.
    • Operating time after expiry of switch-on delay from 0:01 to 999:59 h:min or continuous.
    • Operating time after expiry of switch-on delay and reaching the set point temperature from 0:01 to 999:59 h:min or continuous operation.
  • Separate menu items: temperature limits min/max, over/under temperature alarm up to +/- 10 K, switchover °C/°F and for a process-dependent temperature adjustment.
  • Visual and acoustic alarm in case of water shortage, over/under temperature and sensor break/short circuit.
  • Electronic monitoring; in case of fault, cause is reported on display.
  • Two independently working over-temperature protections.
  • Heating element, bath interior, cover, lid and perforated tray made of stainless steel.
  • Thermal insulating and double-walled arched lid prevents twisting and dropping back of condensed water into the test tubes.
  • Corrosion proof exterior housing made of electrolytically galvanised sheet steel, powder-coated.
  • Lid and perforated tray included as standard scope of supply.
  • Drain cock at the back of the bath.

Width (heating bath): 500 mm
Heating bath model: water/fluid bath
Heating bath temperature max.: 100°C
Heating bath volume: 16 l
Height (heating bath): 345 mm
Cooling: no
Power (heating bath): 1500 W
Depth (heating bath): 440 mm
Shipping weight: 17,70 Kg
Product weight: 15,50 Kg
Dimensions: × × cm
GFL Incubation/Inactivation Bath 1113
Temperature range approx. 10 °C above ambient temperature to +100 °C (boiling mode)
Temperatur range (operation with water level regulator) approx. 3 °C above tap water temperatur to +100 °C
Capacity approx. 16 l
Interior dimensions (W x D x working height) 400 x 245 x 165 mm
Exterior dimensions (W x D x H) 500 x 440 x 345 mm
Electrical connection 230 V / 50...60 Hz / 1,5 kW *
Net / gross weight approx. 15.5 / 17.7 kg
Packing volume approx. 0.149 m3

* Other voltages and frequencies on request

Accessories

Test Tube Rack 1920 Details
Price on application
Test Tube Rack 1921 Details
Price on application
Test Tube Rack 1922 Details
Price on application
Test Tube Rack 1942 Details
Price on application
ProAquaTop 1 bottle Details
Price on application
ProAquaTop 3 bottles Details
Price on application
ProAquaTop 6 bottles Details
Price on application

Related products