ElectroHEAT GHST Housing heating mantle

ElectroHEAT Housing heating hood series GHST

The ElectroHEAT E & E heating hoods of the GH series are handmade. They have a crocheted inner jacket of glass fiber and are used for heating liquids in round bottom flasks.
The heat conductor is made of a NiCr alloy 8020. It is wrapped by a glass tube and is crocheted with a yarn of glass fibers in the inner jacket of the heating hood. Thus, the heat is evenly distributed to the glass flask. The glass fiber tube and the glass yarn also serve as insulation. To ensure that no heat can get into the outer jacket, the inner heating jacket is insulated with glass wool.
The outer jacket is made of aluminium and consists of three parts: floor, housing and cover. These parts are coloured electrostatically.

• The housing heating hoods are built in sizes from 25 ML to 6000 ML.
• The sizes 25 ML and 50 ML are produced with a heating conductor and have one heating zone.
• The size 100 ML is produced with a heating conductor, but can work with ½ power or with full power through the built-in min/max switch.
• The sizes 250 ML-6000 ML have two heating zones and a min/max switch which allows to operate with only one heating zone or to connect the second heating zone as required.
• Can also be attached to a tripod. They have specially designed suspension fittings for this purpose.
• The nominal voltage is 230 V.
• The heating conductor temperature can reach a maximum of 450 ° C.
• The heating hoods are delivered with a safety plug with 1.50 meter cable length.
• The heating hoods have protection class I, degree of protection IP00.
• With a personal protection adapter.