BINDER Cooled incubator KB 53 (E3.1)

Item number: BIND_6041!

EAN: 4064343305341

Category: Incubators, Drying Cabinets

Manufacturer: Binder

Now only 4.730,72 €

Manufacturer’s suggested retail price: 4.979,70 €

Excluding 19% VAT. , plus shipping (Sperrgut)

(including 19% VAT. 5.629,55 €)

Power supply

There are variations of this item. Please select the variation you wish.

Request for quote

Professional service

+49 30-403 667 940

International shipping

Description
Technical data

BINDER Cooled incubator KB 53 (E3.1) with mechanical convection

The most versatile among the cooled incubators for microorganisms: The BINDER KB series cooled incubator controls temperature ranges of -5 °C to 100 °C. With its comprehensive program functions, this cooled incubator offers a wide range of capabilities and delivers reproducible test results.

Electronically controlled APT.line^TM preheating chamber and patented DCT^TM refrigeration system assuring temperature accuracy and reproducible results in both heating and cooling situations
Temperature range -5 °C to 100 °C
MP controller with 2 programs with 10 sections each, alternatively switchable to 1 program with 20 sections
Integrated week program timer with real-time function
Adjustable ramp function via program editor
Digital temperature setting with an accuracy of a tenth of a degree
Adjustable fan speed
Elapsed time indicator
Independent adjustable temperature safety device class 3.1, providing full protection against chamber over-temperature, with visual and audible alarm
Inner glass door
RS 422 interface for communication software APT-COM^TM DataControlSystem
Adjustable intervals for printer
Units up to 115 liters are stackable
2 shelves, stainless steel
BINDER test confirmation

Load max.:	11 - 50 kg
Width outside (incubators,...):	635 mm
Width inside (incubators,...):	400 mm
Maximum temperature (heat):	+ 100 °C
Height outside (incubators,...):	840 mm
Height inside (incubators,...):	400 mm
Incubator model:	cooling incubator
Interior volume:	51 - 100 l
Depth outside (incubators,...):	665 mm
Depth inside (incubators,...):	330 mm
Lowest temperature (cooling):	- 5 °C

BINDER cooling incubator	KB 53
Exterior dimensions
Width (mm)	635
Height (incl. feet) (mm)	840
Depth (incl. door handle, I-panel and connection 100 mm) (mm)	665
Wall clearance, rear (mm)	100
Wall clearance, side (mm)	160
Number of doors (ea.)	1
Inner glass door(s) (ea.)	1
Interior dimensions
Width (mm)	400
Height (mm)	400
Depth (mm)	330
Interior volume (l)	53
Racks (number standard/max.)	2 / 4
Load per rack (kg)	15
Permitted total load (kg)	40
Weight (empty) (kg)	72
Temperature data
Temperature range (°C) 1)	-5 - 100
Temperature variation at 5 °C (± K) at 25 °C (± K) at 40 °C (± K)	0,6 0,2 0,3
Temperature fluctuation max. (± K)	0,1
Recovery time after door was opened for 30 sec 2) at 5 °C (± K) at 40 °C (± K)	4 1
Electrical data
IP protection class acc. to EN 60529	IP 20
Voltage (±10 %) 50/60 Hz (V) 60 Hz (V)	230 1 N ~ 115 1 N ~
Nominal power (kW)	0,46
Energy consumption 3) at 40 °C (W)	215
Noise level (dB (A))	47

1) Lower values are valid up to an ambient temperature of max. 25 °C.
2) To 98% of the set value
3) These values can be used for dimensioning air condition systems.

The useable interior height depends on the position of racks.

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.

Information on product safety

Manufacturer information:

Binder GmbH
Im Mittleren Ösch 5
78532 Tuttlingen, Deutschland
[email protected]

Responsible person:

Mr. Schuldt
0049 30 403 667 940
[email protected]

BINDER Cooled incubator KB 53 (E3.1)

Category: Incubators, Drying Cabinets

Accessories

Related products

Question about product

Request offer