GFL Hybridisation Incubator 7601
Due to the small quantity of necessary hybridisation liquid it is possible to work with a high concentration of probes or antibodies. Therefore, the
Hybridisation Incubator 7601 is considered as the ideal unit for exact hybridisations of DNA and RNA probes with nucleic acid on filter paper and for incubations of protein blots with antibodies.
- Microprocessor-controlled temperature regulation.
- Very good temperature constancy of ± 0.5 °C.
- Optimum temperature distribution throughout the cabinet interior by fan circulation.
- Electronic monitoring of the temperature regulator triggers visual alarm in case of fault. The heating is switched off, the cause of the fault is reported in the LED display.
- Digital temperature readout and setting via LED display, in steps of 0.1 °C.
- Thermostatic over-temperature cut-out to protect the heating element.
- Soft touch keys with characteristic symbols.
- High resolutions of the detections and even results due to the constancy of 10 rpm.
- Variable rotating rack, max. capacity 16 hybridisation tubes.
- Removable rotating rack, can be replaced by up to 5 tilt resistant and extricable perforated trays.
- Key to switch on two cabinet lamps.
- Interior parts of the unit and the rotating rack made of stainless steeel.
- Housing made of electrolytically galvanised sheet steel, powder-coated.
- Clear view of the interior cabinet through a large acrylic glass window.
- 2 clip wheels 7940, 4 bottles 7945 as well as 8 spring clips 7937 are in the standard scope of supply.
Width outside (incubators,...):
|
585 mm
|
Width inside (incubators,...):
|
400 mm
|
Maximum temperature (heat):
|
+ 100 °C
|
Height outside (incubators,...):
|
650 mm
|
Height inside (incubators,...):
|
380 mm
|
Incubator model:
|
hybridisation incubator
|
Cabinet type:
|
incubator
|
Depth outside (incubators,...):
|
630 mm
|
Depth inside (incubators,...):
|
330 mm
|
Shipping weight: |
53,60 Kg |
Product weight: |
45,00 Kg |
Dimensions: |
× × cm |