Spetec Clean room station CleanBoy MiniClean room station and work place. Table-top device
The CleanBoy Mini consists of a laminar flow module series SuSi and a supporting frame made from anodized aluminium. Work can be performed on the table top under category 5 clean room conditions.
One of the most noteworthy features of the modules is the extremely low level of noise produced by the fans. The modules include an operating hours meter, a filter change and error indicator and a display for setting reproducible flow rates.
Control panel
The flow velocity can be controlled in 8 steps. The controls include the ''night reduction'' (eco) mode to save energy costs, and the ''MAX'' function to clean the workstation, parts, or equipment if applicable.
- 8 level adjustment of the flow velocity with night reduction and flushing function
- LCD display with selected flow velocity in m/second
- Automatic flow adjustment with filter replacement indicator (optional)
- LED fault indicator
- Connection options for building control systems (remote monitoring) (optional)
- Interior light switch on the control panel (optional)
- Service and interval indicator, dependent on the usage period
|
Width:
|
701 mm - 800 mm1001 mm - 1100 mm1301 mm - 1400 mm1601 mm - 1700 mm1901 mm - 2000 mm
|
|
Device type:
|
filter moduleclean benchProduct protection
|
|
Height:
|
1201 mm - 1300 mm
|
|
Cleanroom equipment:
|
Clean room station
|
|
Depth:
|
701 mm - 800 mm
|
| Clean room station |
Spetec CleanBoy Mini |
| Type/Size |
Mini 37 |
Mini 56 |
Mini 75 |
Mini 93 |
Mini 112 |
| Filter dimensions (mm) |
610 x 610 |
915 x 610 |
1220 x 610 |
1525 x 610 |
1830 x 610 |
Outer dimensions
B x T x H (mm) |
735 x 740 x 1204
|
1040 x 740 x 1204
|
1345 x 740 x 1204
|
1650 x 740 x 1204
|
1955 x 740 x 1204
|
Spetec Clean room technology Service
We - as a manufacturer and service provider for clean room technology - provide a range of device variants on the one hand, and fast and universal service assistance on the other hand. Now we have used our many years of experience as a manufacturer to develop a services offering, which allows us to test, service, and maintain your clean room system using state of the art measuring equipment.
Very clean air is not just vital in clinic operating rooms. Highly sensitive production environments, such as those in the semiconductor production, precision engineering, optics and optoelectronics, laser technology, or food processing industries, also demand a sufficient level of ambient air quality. In order to ensure this, flow velocity or filter tests are required at regular intervals.
We offer the following services:
- Particle counts
- Replacing filters in various brands of laminar flow boxes (LF units)
- Finding and fixing leaks
- Determining volume flow rates or flow velocities
- Temperature and relative humidity measurements
-HEPA filter / filter system installation monitoring
- DEHS leak test
- Clean room validation and certification in accordance with EN ISO 14644 and GMP guidelines
We also perform certification within the framework of EN ISO 14644, that is, we record the measurement parameters defined in DIN EN ISO 14644 such as particle counts, flow velocities, etc. All of these parameters are confirmed with a corresponding certificate.
All of the particle measurement devices, air speed, temperature, and humidity sensors we use are tested and calibrated every 12 months.
Our offering includes service and maintenance work as well as certification of clean rooms and laminar flow boxes according to the current national and international guidelines and standards. These include the VDI 2083 and DIN EN ISO 14644 guidelines as well as the US Fed Std. 209E. You receive comprehensive documentation about the measurements and a risk assessment.
Info Reinraumstation CleanBoy
Info Clean room station CleanBoy
