PFS Single Use USB PDF Temperature Data Logger
Compact USB temperature data logger for direct use in the shipping carton to record the temperature during the entire transport.
The Single Use USB PDF data logger was specially developed for monitoring temperature-sensitive products throughout the entire cold chain.
The data logger is already pre-configured and ready-to-use. Due to the set start delay, the data logger can be used immediately and does not require any preconditioning.
The integrated USB interface means that no cable or reader is required to receive the automatically generated PDF report.
The PDF report contains detailed information about the temperature course in the form of temperature curves, tabular measured values, as well as detailed statistics about all relevant data.
The data logger does not have to be labelled as dangerous goods according to IATA dangerous goods regulations and can therefore be used without restrictions without causing additional costs.
The Features at a Glance
- GDP-compliant temperature recording of the entire cold chain.
- Ready-to-use and cost-efficient
- Easy operation without additional software.
- Start delay of 30 minutes
- Waterproof and food safe
- Detailed PDF report including statistics, graphs and tables.
- LED signal in case of a temperature deviation.
- 2 years shelf life / calibration certificate available.
Temperature recording in the supply chain for temperature-sensitive productsThe transport of temperature-sensitive goods is subject to strict guidelines, as well as great cost pressure and maximum requirements for quality and documentation.
With the help of data loggers and their evaluations, it can be proven and documented that temperature-sensitive products were not exposed to temperatures during transport that could have a negative impact on product quality.
Even small deviations in temperature can lead to costly or even life-threatening consequences for patients, so the use of calibrated data loggers is absolutely essential.
Dimensions (in mm):
|
69 x 33 x 5
|
Alarm signal:
|
optical
|
Weight, approx.:
|
10 g
|
Measurement type:
|
Temperature data logger
|
Standards:
|
CEEN 12830FDA 21 CFR Part 11Calibration certificateROHS
|
Interfaces:
|
USB
|
Protection class (measurement technology):
|
IP 67
|
Power supply via:
|
Battery
|
Storage medium:
|
USB stick
|
Thermometer-type:
|
Transport thermometer
|
Shipping weight: |
1,01 Kg |
Product weight: |
0,01 Kg |
Dimensions: |
× × cm |