asecos Gas cylinder cabinet G-CLASSIC-30, 90 cm light grey / light grey

Standard interior equipment consisting of: mounting rails, cylinder retainer and rolling ramp, tension belts for cabinet width 900 mm / not configurable with components equipment

asecos Additional tension belt

asecos Preparation for pipe lead-through with female thread for up to 2 Ermeto fittings

asecos Ermeto fitting

asecos 2nd cylinder retainer with 2 tension belts for the additional fixing of small gas cylinders

asecos Gas cylinder trolley for one 50-litre gas cylinder, 320 x 335 x 1090

asecos Lateral cylinder retainer for two 10-litre cylinders

• sheet steel, powder-coated in RAL 7035

asecos Lateral cylinder retainer, height adjustable without tools for two 10-litre cylinders

• sheet steel, powder-coated in RAL 7035

asecos Standard interior equipment consisting of: Mounting rails, cylinder retainer and rolling ramp, tension belts

Can only be ordered in conjunction with cabinet!

asecos Shelf

• sheet steel, powder-coated in RAL 7035
• W x D x H (mm): 785 x 340 x 25
• load capacity (kg): 75

asecos Heavy duty shelf in form of grid

• galvanized steel
• W x D x H (mm): 735 x 280 x 30
• load capacity (kg): 150

asecos Extraction module for technical ventilation of up to 4 safety storage cabinets

Safe capturing of escaping vapours and gases at the point where they are released or produced

• suitable for 10 times air change
• extraction air monitoring with integrated pressure leak detector
• with wall console and installation material
• connecting fitting 100/140 NW
• ATEX complient: CE II 3/- Gc IIC T4
• housing made of sheet-steel plastic laminated
• dimensions W x D x H (mm): approx. 600 x 300 x 600
• weight approx. 7 kg

asecos Extraction unit - ready to plug-in, easy and quick installation

Safe capturing of escaping vapours and gases at the point where they are released or produced

• very low noise, ideal for direct installation at the workplace
• with connection cable and power cord
• connecting fitting 75 NW
• imensions W x D x H (mm): 200 x 400 x 200
• ATEX complient: CE II 3/-G c T4

without extraction air monitoring

• the green LED turns off in case of power breakdown

asecos Extraction unit - ready to plug-in, easy and quick installation

Safe capturing of escaping vapours and gases at the point where they are released or produced

• very low noise, ideal for direct installation at the workplace
• with connection cable and power cord
• connecting fitting 75 NW
• imensions W x D x H (mm): 200 x 400 x 200
• ATEX complient: CE II 3/-G c T4

with extraction air monitoring

• integrated pressure leak detector
• the green LED turns off in case of failure and the red LED lights up

asecos Extraction unit - ready to plug-in, easy and quick installation

Safe capturing of escaping vapours and gases at the point where they are released or produced

• very low noise, ideal for direct installation at the workplace
• with connection cable and power cord
• connecting fitting 75 NW
• imensions W x D x H (mm): 200 x 400 x 200
• ATEX complient: CE II 3/-G c T4

with extraction air monitoring

• integrated pressure leak detector
• the green LED turns off in case of failure and the red LED lights up

voltage free switch contact

• additionally available for units with extraction air monitoring

asecos Extraction unit - ready to plug-in, easy and quick installation

Safe capturing of escaping vapours and gases at the point where they are released or produced

• very low noise, ideal for direct installation at the workplace
• with connection cable and power cord
• connecting fitting 75 NW
• imensions W x D x H (mm): 200 x 400 x 200
• ATEX complient: CE II 3/-G c T4

without extraction air monitoring

• the green LED turns off in case of power breakdown

for installation on a wall

• incl. installation consoles, flexible hose, hose clips and installation material

asecos Extraction unit - ready to plug-in, easy and quick installation

Safe capturing of escaping vapours and gases at the point where they are released or produced

• very low noise, ideal for direct installation at the workplace
• with connection cable and power cord
• connecting fitting 75 NW
• imensions W x D x H (mm): 200 x 400 x 200
• ATEX complient: CE II 3/-G c T4

with extraction air monitoring

• integrated pressure leak detector
• the green LED turns off in case of failure and the red LED lights up

for installation on a wall

• incl. installation consoles, flexible hose, hose clips and installation material

asecos Extraction unit - ready to plug-in, easy and quick installation

Safe capturing of escaping vapours and gases at the point where they are released or produced

• very low noise, ideal for direct installation at the workplace
• with connection cable and power cord
• connecting fitting 75 NW
• imensions W x D x H (mm): 200 x 400 x 200
• ATEX complient: CE II 3/-G c T4

with extraction air monitoring

• integrated pressure leak detector
• the green LED turns off in case of failure and the red LED lights up

voltage free switch contact

• additionally available for units with extraction air monitoring

for installation on a wall

• incl. installation consoles, flexible hose, hose clips and installation material

asecos Radial fan - powerful and safe

• housing and impeller made of polypropylene
• sealed against gas emission
• connecting fitting 75 NW
• VDMA and CE conformal
• protection class IP 55
• air flow 60-250 m³/h
• total pressure 240-175 Pa
• incl. PA/GFK console

asecos Radial fan, EX-proof - powerful and safe

• housing and impeller made of polypropylene
• sealed against gas emission
• connecting fitting 75 NW
• VDMA and CE conformal
• protection class IP 55
• air flow 60-250 m³/h
• total pressure 240-175 Pa
• incl. PA/GFK console