uv-technik meyer UV-C lamp UV-STYLO-RPSurface disinfection in cold storage and deep-freeze rooms
Permanently prevents biofilm formation on the evaporator and the spread of germs. Permanently reduces energy consumption.
- The permanent disinfection of the refrigeration evaporator saves energy costs up to 20 %.
- There are no more cleaning and disinfection costs.
- Reliably preventing the formation of biofilms significantly reduces germ and mould formation by up to 99.9%.
- The simple installation is done by your refrigeration engineer in no time.
Properties:
- 5 selectable lengths
- Low installation effort
- External control module (Master)
- CE marking (LVD, EMC, MD, RoHS)
- HACCP compliant
Fields of application:The UV-STYLO-RP can be used on all refrigeration or combination evaporators, which are difficult to access.
UV-STYLO is very compact, the diameter is only 29 mm and is available in different lengths.
The enclosure protection IP 68 allows the use in aggressive or wet environments.
Thanks to the patented UVLON shatter protection, no glass splinters can escape in the event of a lamp breakage.
To achieve a better level of disinfection, several units can be combined.
Spring steel clamps are used for the installation of UV-STYLO-RP. The ballast is mounted outside the cell or cabinet and is controlled by the fan control unit.
A recurring problem in refrigeration units is the clogging of the piping for the condensation water on the refrigeration evaporator. In the course of time, aerosols and dust are added to the refrigeration evaporator by a biofilm mouse. After each defrosting process the biomass collects in the piping. In addition, highly contaminated air is fed into the cooling unit by the fan.
Please select a model.
|
Width:
|
up to 600 mm601 mm - 700 mm901 mm - 1000 mm
|
|
Disinfection:
|
Surface
|
|
Device type:
|
UV Sanitizerlamp
|
