ELGA MEDICA Pro R30 - ProfiLab24 GmbH
99
100
24
4
stars -
Professional service
Customer
Young team with a lot of ambition and quick answers to all questions. We needed a complete laboratory equipment for our new location. The team of Profiab24 has arranged everything.
ELGA MEDICA Pro R30 in Water Stills, Water Treatment
ELGA MEDICA Pro R30. Order at ProfiLab24 Online catalog for laboratory equipment. Top service. Secure payment.
ELGA MEDICA Pro R30The MEDICA Pro supplies Clinical Laboratory Reagent Water (CLRW) standard (formally CLSI Type 1) water using UV and microfiltration technologies together with recirculation and ion exchange. This compact system is ideal to directly feed large or linked multiple analyzers.
Features
- Delivers up to 4 liters per minute of CLRW standard water (formally CLSI Type 1 water)
- Bacterial specification <1CFU/ml. Simple sanitization programme runs quickly
- Compatible with single and multiple clinical diagnostic analyzers which require up to 4 liters per minute of CLRW standard water
- Low running and consumable costs
- Space saving design with its integrated wrap around 50 liter reservoir
- A bypass loop for continual supply of compliant water in emergency situations to the analyzer
- Easy to install under a bench
- Full service and validation support
For operating a MEDICA Pro system, a starter kit 1, 2 or 3 is required.
Booster pump:
|
without
|
Power:
|
30 l/h
|
Storage tank - tank:
|
with
|
Water treatment type:
|
ultrapure water system
|
Water source:
|
from the water mains
|
Product weight: |
45,00 Kg |
MODEL |
MEDICA Pro-R30 |
Treated Water Specifications |
|
Make-up rate at 15°C |
30 l/hr |
Delivery flow rate - maximum |
Up to 4 l/min at 14psi (1bar) 1)
|
Inorganics (resistivity at 25°C) |
>10 MOhm-cm |
Organics (TOC) - typical |
<30 ppb |
Bacteria - typical |
<1 CFU/ml 2)
|
Particles |
0.05 µm filter |
Silica |
<0.05 mg/l |
Dimensions and weights |
|
Dimensions |
Height 820mm (32.8in) Height 834mm (33.4in) including castors Width 794mm (31.8in) Depth 470mm (18.8in) |
Supply weight |
45kg |
Operational weight |
102Kg |
Installation |
Floor/bench |
Feedwater Requirement |
|
Source |
Tap water as detailed below |
Conductivity |
<2000 µS/cm 3)
|
Contaminant |
|
Hardness |
<250 ppm as CaCO3
|
Free Chlorine |
<4 ppm Cl2
|
Chloramine |
<1 ppm Cl2
|
Silica |
<30 ppm SiO2
|
Fouling Index |
<10 FI |
Iron/manganese |
<0.1 ppm |
Organics |
<3 ppm TOC |
Temperature |
4 - 40°C (Recommended 15 - 25°C) |
Flowrate (requirement at 15°C) |
9 l/min |
Drain requirements (gravity fall with air gap) |
20 l/min |
Feedwater pressure |
90psi (6bar) maximum 30psi (2bar) minimum |
Electrical Requirements |
|
Mains Input |
230V ac, 50Hz 115V, 60Hz |
System control voltage (not including pumps and UV) |
24V dc |
Power consumption (peak demand) |
650VA |
Electrical protection rating |
10 amps |
Noise level |
<63dBA |
1) With high flow kit (LA700) or 2 l/min at 14 psi (1bar) without high flow kit
2) Subject to correct operating and maintenance procedures
3) Purification pack life may vary with feedwater >1400 µS/cm