ELGA PURELAB Classic DI

Item number: ELGA_21010

Category:

ELGA

Manufacturer: VWS Deutschland

starting from 3.860,80 €

Manufacturer’s suggested retail price: 4.064,00 €

Excluding 19% VAT. , no shipping costs (Standard)

(including 19% VAT. 4.594,35 €)


ELGA PURELAB Classic DI

The PURELAB Classic system combines high performance with economy to deliver 18.2 MOhm-cm water at a very cost-effective price. Despite its budget price the PURELAB Classic contains many market leading features.
  • Ultra-pure water at very economic costs for the equipment and the cost of ownership
  • Complete sanitization of all wetted parts ensures optimum microbial performance
  • Automatic intermittent recirculation minimizes temperature build-up and optimizes microbial performance
  • Very easy to maintain - incorporates "fast rinse" ultra filter
  • Upgradable from single pack to twin pack purification


To operate a system PURELAB Classic Twin Pack a treatment cartridge type LC186 is required.
The Twin Pack preparation cartridge type LC186 must be ordered separately.

Modell: ClassicDI
Water treatment model: ultrapure water system
Booster pump: without
Capacity: 2 l/min
Storage tank - tank: without
Water source: of ion exchanger from reverse osmosis system
Shipping weight:19,00 Kg
Product weight:14,00 Kg
Model Classic DI
Treated Water Specifications
Flowrate2.0 l/min max
Inorganics18.2 MOhm-cm
TOC3 - 10 ppb
Bacteria<1 CFU/ml1)
Bacterial endotoxin-
pHEffectively neutral
Particles0.2 µm1)
RNase and DNase-
Cartridge capacity (LC162)45,000 liters >18 MOhm-cm per single purification pack/µS at pH 7.0
70,000 liters >1 MOhm-cm per single purification pack/µS at pH 7.0
Dimensions and Weights
Height490mm (19.3in)
Width410mm (16.2in)
Depth365mm (14.4in)
Weight14.0kg (30.8 lb)
Feedwater Requirements
ParameterLimits
Source - originally from potable supply, then pre-treatedPreferably reverse osmosis (RO) or filtered service deionization (SDI) or distilled.
Note: mixed bed or twin bed deionized supplies should be cation limited at exhaustion.
Fouling index (max)
A 0.2 micron membrane prefilter is recommended for all non-RO feeds.
Service deionization (SDI) - MO-cm1 MOhm-cm minimum resistivity at exhaustion.
Reverse osmosis (RO) - µS/cmRecommended < 30 µS/cm
Free chlorine0.05 ppm max.
TOC Recommended50 ppb max.
Carbon dioxide30 ppm max.
Silica2 ppm max.
ParticulatesFiltration down to 0.2 micron advisable to protect internal and/or point of use filters.
Temperature1 - 40°C Recommended 10 - 15°C
Flowrate (maximum requirement)130 l/hr
Drain requirements (gravity fall with air gap). Maximum during serviceUp to 2 l/min
Feedwater pressure0.7 bar (10 psi) maximum,
0.07 bar (1 psi) minimum
Electrical Requirements
Mains input100 - 240V ac, 50 - 60Hz
System voltage24V dc
Power consumption during recirculation60VA
Power consumption during dispense75VA
Fuses2 x T6.3 Amp
Reservoir level connectionJack Plug 3.5mm
Noise level during recirculation<40dBA



1) With POU filter fitted.
Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
  • Accessories Classic DI, UF and UVF
Your selection
1ELGA PURELAB Classic DI3.860,80 €

Total: