ELGA PURELAB Option-R 15The PURELAB Option provides Type II +/II pure water on demand with a wide range of flow-rates to suit your needs. Applications range from glassware washing and the feeding of ultrapure water systems to cell culture and media preparation. The PURELAB Option-R provides additional bacteria and inorganic quality for your more critical applications.
- Delivers market leading microbial performance. In addition to simple sanitization and composite vent filtration, the PURELAB Option-R system is the only fully recirculating Type II+ pure water system on the market, ensuring high specification water
- Features "Reverse Osmosis feed optimized" resin mixes to increase the ion exchange capacity of consumables and minimize running costs
- Quick and easy sanitization and replacement of consumables to reduce maintenance time
- PURELAB Option systems are designed to be easy to access whether wall or bench mounted with a convenient dispense tap. They can be used with our wrap-around reservoirs to save space whilst optimizing purity
To operate a PURELAB Option-S / R Systems, a tank with 5 level switches is required.
|
Booster pump:
|
without
|
|
Power:
|
1,0 l/min
|
|
Modules:
|
RO-moduleUV-modules
|
|
Storage tank - tank:
|
without
|
|
Water treatment type:
|
pure water system
|
|
Water source:
|
from the water mains
|
| Shipping weight: |
22,50 Kg |
| Product weight: |
19,00 Kg |
| Model |
Option-R 15 |
| Treated Water Specifications |
|
| Make up rate 1) |
15 l/h |
| Dispense rate from tap |
1,0 l/min-nominal (less with POU filter) |
| Daily output (nominal max) 1) |
360 l/24 hour day |
| Output reverse pressure (max.) 2) |
0,1 bar (1 psi) |
| Purity |
|
| Inorganics at 25°C |
10 to >15 MOhm-cm |
| Total organic carbon (TOC) |
<20 ppb |
| Bacteria |
<1 CFU/ml |
| pH |
Effectively neutral |
| Particles |
Optional 0.2µm POU filter |
| Dimensions and weights |
|
| Height |
460 mm (18,1") |
| Width |
550 mm (21,7") |
| Depth |
270 mm (10,6") |
| Weight without internal boost pump |
19 kg (42 lb) |
| Feedwater Requirements |
|
| Source Quality |
Potable mains water supply |
| Fouling Index (max.) |
10 |
| Total dissolved solids (max.) |
1400 µS/cm |
| Free chlorine (max.) |
0,5 ppm |
| Heavy metals (max.) |
0,05 ppm |
| Silica (max.) |
30 ppm |
| Temperature |
1 - 35°C |
| Flowrate (maximum requirement) |
85 l/h |
| Drain requirements (gravity fall with air gap). Maximum during service |
70 l/h |
| Feedwater Pressure |
|
| Maximum - without internal boost pump |
6,0 bar (90 psi) |
| Minimum - without internal boost pump |
4,0 bar (60 psi) |
| Electrical Requirements |
|
| Mains input |
100 - 240 V ac, 50 - 60 Hz |
| System voltage |
24 V dc |
| Power consumption without boost pump |
50 VA |
| Fuses |
2 x T 6,3A |
| Reservoir level connection |
Jack Plug 3.5mm |
| Noise level |
<45 dBA |
1 Standard conditions are 4 bar inlet pressure, 0 bar back pressure at 15 degrees centigrade, fed with potable water and a clean pre-treatment cartridge.
2Subject to suitable feedwater
