ELGA PURELAB Pulse 2

Item number: ELGA_21020>

EAN: 4064343198882

Category: ELGA

Manufacturer: VWS Deutschland

Price on application


ELGA PURELAB Pulse 2

The PURELAB Pulse is the cost-effective choice for laboratories that require higher output volumes especially in hard water areas. Applications range from sample dilution and reagent preparation, cell culture, media preparation and glassware washing.
  • Incorporates patented "Pulse Technology" using Electrodeionization (EDI) to provide a constant supply of high purity water at economical running costs. No costly resin replacement
  • Unique integral recirculation ensures optimum pure water quality at point of dispense
  • Improved laboratory productivity - longer periods between sanitization along with quick and easy replacement of consumables reduces maintenance time
  • Easy to access whether wall or bench mounted, with a convenient dispense tap. The systems can be used with our wrap-around reservoir to minimize space whilst optimizing purity

To operate a PURELAB Pulse system, a tank with 5 level switches is required (eg LA737)

Modell: Pulse2
Water treatment model: pure water system
Booster pump: without
Capacity: 1,0 l/min
Storage tank - tank: without
Water source: from the water mains
Modules: UV-modulesEDI-moduleRO-module
Shipping weight: 24,00 Kg
Product weight: 19,00 Kg
Model Pulse 2
Treated Water Specifications
Make up rate 15°C1 up to 20 l /hr
Daily output1 up to 216 l /24 hour day
Dispense rate from tap (max) 1.0 l / min-nominal (less with POU filter)
Output back pressure (max)2 0,1 bar (1 psi)
Inorganics at 25°C3 10 to >15 MOhm-cm
Total organic carbon (TOC) <20 ppb
Bacteria2 <1 CFU/10ml
pH Effectively neutral
Particles Optional 0.2 µm POU filter
Dimensions and weights
Height, Width, Depth Height 460 mm (18,1"),
Width 550 mm (21,7"),
Depth 270 mm (10,6")
weight 19 kg (42 lb)
Installation Bench/wall
Feedwater Requirements
Source Potable Mains water supply as detailed below
Conductivity <1400 µS/cm
Temperature 1 - 35°C
Flow rate required (maximum) 80 l/h
Drain requirements (minimum) 80 l/h
Contaminant
Hardness <350 ppm as CaCO3
Free Chlorine <0,5 ppm
Chloramine <0,2 ppm
TOC <3 ppm
Silica <30 ppm
Fouling Index <10
Iron/Manganese <0,2 ppm
Max. CO2 <30 ppm
Feedwater Pressure 90 psi (6.0 bar) maximum, 60 psi (4.0 bar) minimum
Electrical Requirements
Mains input 100 - 240 V ac, 50 - 60Hz
System voltage 24 V dc
Power consumption 85 VA
Fuses 2 x T 6,3 A
Reservoir level connection Jack Plug 3.5mm
Noise level <45 dBA


1 Standard conditions are 4 bar inlet pressure, 0 bar back pressure, fed with potable water and a clean pre-treatment cartridge.
2Subject to correct operating and maintenance procedures and use of POU filter.
3 Optimum performance will be achieved with moderate use on moderate feedwaters. At high usage, (>100 l/day) with high Total Conductivity and CO2 feedwaters (>700µS/cm, 20 ppm CO2) some reduction in product water resistivity may occur.