Evoqua Ultrapure Water System LaboStar

Item number: EVO_21003

EAN: 4064343239981

Category: Evoqua

Manufacturer: Evoqua

Price on application
type

There are variations of this item. Please select the variation you wish.


Evoqua LaboStar

HIGHEST WATER QUALITY - ECONOMICALLY PRODUCED

The LaboStarTM system is a cost effective means of producing analytical grade water. This extremely compact ultrapure water system can be used on a laboratory bench or can also be mounted on the wall. The water produced by the deionized (DI) version has a conductivity of 0.055 µS/cm (equivalent to 18.2 MO- cm) and a TOC value of < 10 ppb. The water produced by the ultraviolet (UV) version has a TOC value of 1 - 5 ppb. This water quality exceeds all relevant standards including ASTM Type I, CLSI (Clinical Laboratory Standards Institute) and ISO 3696 Type I. The LaboStarTM system is fed with either deionized water, distilled water or permeate from a reverse osmosis unit.
The selection of treatment materials in LaboStarTM 2 and 4 systems, along with the DI polishing modules, gurantees that the product water meets the highest quality standards. A conductivity meter in the recirculation section continually monitors the purity of the product water.
A 0.2 µm charged sterile filter at the dispenser removes bacteria and endotoxins. This makes it possible to produce pure water with an endotoxin content of < 0.001 EU/ml without the need for any further investment in an ultra filter. An uncharged 0.2 µm final filter is also available.

LABOSTARTM SYSTEM ADVANTAGES:
  • Ultrapure water circulation right into the dispenser head
  • Easy to dispense water using the practical dispenser
  • Whisper operation mode
  • Rapid and simple disinfection
  • Conductivity monitoring of ultrapure water
  • Pressure reducer included (only type 2)
  • Simple module exchange via quick-release connections
  • Protective jacket at the end of the sterile filter

TYPICAL APPLICATIONS
All LaboStarTM DI types:
  • General analysis
  • standard buffer
  • AAS
  • GC
  • IC
  • ICP
  • cell and tissue culture
  • pyrogen sensitive applications
All LaboStarTM UV types:
  • Micro- und molecularbiology
  • PCR
  • HPLC
  • TOC analysis

LABOSTARTM 4 SYSTEM
ADVANTAGES:
  • 7 liter tank volume
  • Suitable for mobile use
  • Ultrapure water is ready for use within minutes of filling the tank
  • System can be used at different locations

Power: 1,5 l/min
Storage tank - tank: without
Water treatment type: ultrapure water system
Shipping weight: 30,00 Kg
Product weight: 20,00 Kg
LABOSTARTM SERIES SYSTEM DI 2 UV 2 UV 4
Ultrapure water specifications
Output
(Gravity feed 1.2 l/min)
up to LPH
1,5 1,5 1,5
Conductivity at 25° C
µS/cm
0,055 0,055 0,055
Resistivity at 25° C
M Ohm-cm
18,2 18,2 18,2
TOC
ppb
5 - 10 1 - 5 1 - 5
Bacteria
cfu/ml
< 1 < 1 < 1
Endotoxins with use of filter
EU/ml
< 0,001 < 0,001 < 0,001
Particles > 0.2 µm
per ml
< 1 < 1 < 1
Feed water specification
Pressure
bar
0,1 - 6 0,1 - 6 -
Conductivity
µS/cm
< 20 < 20 < 20
TOC
ppb
< 50 < 50 < 50
CO2 max.
mg/l
15 15 15
Temperature
°C
5 - 35 5 - 35 5 - 35
Power supply
V/Hz
100-240 / 50-60
Dimension
H/W/D mm
535 / 290 / 320 535 / 290 / 320 535 / 290 / 400
Shipping weight
kg
20/21 22/23 23/24