GFL Water Still for double distillation 2102

Item number: GFL_21007

EAN: 4064343367578

Category: GFL

Manufacturer: GFL

Price on application


GFL Water Stills are the result of experience for decades and technical advancement. They produce highly pure, poor in gas, bacteria and pyrogen free distillate with very low conductivity. It complies with DAB regulations and with international pharmacopeia requirements. 

All GFL Water Stills work economical due to the distillation of heated cooling water, they are reliable, maintenance-free, easy to operate and to service and bear the CE mark. All units are suitable for desktop and wall mounting.

GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications and HPLC, too. 

  • Water Still (fully automatic) for double distillation, suitable for both bench and wall mounting.
  • Very good distillate quality; conductivity: single distillate: approx. 2.2 µs/cm at 25 °C, double distillate: approx. 1.6 µs/cm at 25 °C.
  • Electronic level control during the whole distilling process.
  • Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator 1st stage, the red pilot lamp "Clean" will glow.
  • Double-action low water cut-off through float switch and thermostatic safety switch.
  • Economical energy consumption by distillation of the heated cooling water.
  • Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.
  • Condenser (cooler): 1st stage made of stainless steel; 2nd stage including the baffle made of DURAN® Borosilicate glass 3.3.
  • Evaporator easily accessible for cleaning purposes .
  • Distillate withdrawal: valve made of Borosilicate glass 3.3 with "PTFE" plunger for single distillate, outlet with dust guarde shield made of Borosilicate glass 3.3 for double distillate.
  • CO2 degassing through outlet in the condenser.
  • Heating element and evaporator made of stainless steel.
  • Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.
  • Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).
  • Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).
  • Hoses for water in- and outlet are available as accessory.

Power: 2 l/h
Storage tank - tank: without
Water treatment type: water still for double distillation
Shipping weight: 47,00 Kg
Product weight: 20,90 Kg
Dimensions: × × cm
Capacity 2 l / h 
Conductivity
Single distillate: approx. 2.2 µs / cm at 25 °C,
Double distillate: approx. 1.6 µs / cm at 25 °C * 
Cooling water required approx. 72 l / h 
Minimum water pressure 3 bar to max. 7 bar
Exterior dimensions (W x D x H)  500 x 260 x 470 mm
Electrical connection 230 V / 50...60 Hz / 3.5 kW (other voltages on request) 
Net weight approx. 18.0 kgs
Gross weight (cardboard box)  approx. 26.0 kgs
Gross weight (wooden case)  approx. 30.0 kgs
Packing volume approx. 0.26 m3


* Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.