GFL Water Still for single distillation 2004 - ProfiLab24 GmbH
99
100
24
4
stars -
Professional service
Customer
Young team with a lot of ambition and quick answers to all questions. We needed a complete laboratory equipment for our new location. The team of Profiab24 has arranged everything.
GFL Water Still for single distillation 2004 in Water Stills, Water Treatment
Item number: GFL_21004
EAN: 4064343367608
Category: GFL
Manufacturer:
GFL
GFL Water Still for single distillation 2004. Order online at ProfiLab24 .com with top advice and 24/7 service. Fast delivery. Secure payment.
GFL Water Stills are the result of experience for decades and technical advancement. They produce highly pure, poor in gas, bacteria and pyrogen free distillate with very low conductivity. It complies with DAB regulations and with international pharmacopeia requirements.
All GFL Water Stills work economical due to the distillation of heated cooling water, they are reliable, maintenance-free, easy to operate and to service and bear the CE mark. The built-in storage tank accepts twice the hourly capacity of the unit.
GFL Water Stills are used in research and development e. g. for preparing bacteriological and medical samples, for cell and tissue cultures as well as for the production of reagents and unguents. Moreover, distillate is used for cleaning and sterilisation processes, for buffered solutions as well as microbiological and analytical applications.
- Water Still for single distillation (fully automatic) with storage tank, suitable for both bench and wall mounting.
- Very good distillate quality; conductivity approx. 2.3 µs / cm at 25 °C.
- The distillate storage tank accepts twice the hourly capacity of the still.
- Electronic level switch switches the still off when the storage tank is full and restarts it automatically when distillate is withdrawn.
- Electronic impurity detector switches the unit off in case of high degree impurities of the water in the evaporator, the red pilot lamp "Clean" will glow.
- Thermostatic low water cut-off.
- Economical energy consumption by distillation of the heated cooling water.
- Water saving through automatic water cut-off. Unnecessary water consumption will be avoided.
- Evaporator easily accessible for cleaning purposes .
- Condenser (cooling coil) inside the storage tank, easily exchangeable.
- Distillate withdrawal through drain cock with continuous and touch position.
- CO2 degassing through outlet in the condenser.
- Heating element, evaporator, storage tank and condenser made of stainless steel.
- Double-walled housing. Outer housing made of electrolytically galvanised sheet steel, electrostatically powder-coated with epoxy resin.
- Water supply through a built-in solenoid valve with connection for pressure hose 1/2" (inner ø approx. 12.7 mm).
- Cooling water outlet with hose connection 3/4" (ø approx. 19.0 mm).
- Hoses for water in- and outlet are available as accessory.
Power:
|
4 l/h
|
Storage tank - tank:
|
with
|
Water treatment type:
|
single water still
|
Shipping weight: |
23,50 Kg |
Product weight: |
21,40 Kg |
Dimensions: |
× × cm |
Capacity |
4 l / h |
Conductivity |
approx. 2.3 µs / cm at 25 °C * |
Storage tank capacity |
8 l |
Cooling water required |
approx. 48 l / h |
Minimum water pressure |
3 bar to max. 7 bar |
Exterior dimensions (W x D x H) |
620 x 330 x 460 mm |
Electrical connection |
230 V / 50...60 Hz / 3.0 kW (other voltages on request) |
Net weight |
approx. 20.2 kgs |
Gross weight (cardboard box) |
approx. 24.0 kgs |
Gross weight (wooden case) |
approx. 35.0 kgs |
Packing volume |
approx. 0.16 m3
|
* Value averaged by Institut Fresenius for operation with tap water. The distillate quality depends on the quality of raw water.