Nabertherm Chamber Furnace with Fibre Insulation

Item number: NAB_8164

EAN: 4064343428927

Category: Nabertherm

Manufacturer: Nabertherm

starting from 9.462,00 €

Manufacturer’s suggested retail price: 9.960,00 €

Excluding 19% VAT. , plus shipping (Sperrgut)

(including 19% VAT. 11.259,78 €)

Model/ Controller

There are variations of this item. Please select the variation you wish.

Request for quote

Professional service

+49 30-403 667 940

International shipping

Description
Technical data

Nabertherm Chamber Furnace with Fibre Insulation LF 15/13 - LF 120/14
These laboratory furnaces have proven themselves for many years as professional chamber furnaces for the laboratory. The furnaces are available either with a robust insulation of lightweight refractory bricks (LH models) or with a combined insulation of lightweight refractory bricks in the corners and low-storage, fast-cooling fibre material (LF models). With a wide range of additional equipment, these models can be optimally designed for the required process.

Tmax 1300 °C or 1400 °C
Double-walled enclosure construction with rear ventilation, thus low outer wall temperature
Five-sided heating for very good temperature uniformity
Heating elements on support tubes ensure free heat radiation and a long service life
Controller suspended in the oven door and removable for convenient operation
Protection of the bottom heating and level stacking support by recessed SiC plate in the bottom
LH models: multi-layer, fibre-free insulation made of lightweight refractory bricks and special back insulation
LF models: High-quality non-classified fibre insulation with masonry corner bricks for shortened cooling times and heat-up times
Door with brick-on-brick seal, ground in by hand
Short heating times due to high electrical connection values
Self-supporting ceiling vault for high stability and maximum protection against dust infestation
Quick-action door lock
Motor-driven exhaust air flap
Infinitely variable air supply slider in the floor of the oven
Underframe included
NTLog Basic for Nabertherm controller: recording of process data with USB stick

Additional equipment

Parallel swing door, swings away from the operator, for opening when hot
Lifting door with electro-mechanical linear drive
Separate wall-mounted or floor-standing cabinet for switchgear
Cooling fan to shorten cycle times
Protective gas connection for purging the furnace with non-flammable protective or reaction gases
Manual or automatic gas supply system
Weighing device for determination of loss on ignition
Process control and documentation via VCD software package or Nabertherm Control Center NCC for monitoring, documentation and control

Width outside (oven):	680 mm710 mm790 mm890 mm
Width inside (oven):	250 mm320 mm400 mm500 mm
Height outside (oven):	1230 mm1290 mm1370 mm1470 mm
Height inside (oven):	250 mm320 mm400 mm500 mm
Power (oven):	7 kW8 kW10 kW11 kW12 kW15 kW18 kW
Stove appliance type:	chamber and muffle furnace
Oven volume:	15 l30 l60 l120 l
Oven temperature max.:	1300°C1400°C
Depth outside (oven):	860 mm930 mm1080 mm1180 mm
Depth inside (oven):	250 mm320 mm400 mm500 mm

Model	T max [°C]	Volume [l]	Internal dimensions W x D x H [mm]	External dimensions¹ W x D x H [mm]	Connected load [kW]	Electrical connection^*	Weight [kg]
LF 15/13	1300	15	250 x 250 x 250	680 x 860 x 1230	7,0	3-phase2	150
LF 30/13	1300	30	320 x 320 x 320	710 x 930 x 1290	8,0	3-phase2	180
LF 60/13	1300	60	400 x 400 x 400	790 x 1080 x 1370	11,0	3-phase	270
LF 120/13	1300	120	500 x 500 x 500	890 x 1180 x 1470	15,0	3-phase	370

LF 15/14	1400	15	250 x 250 x 250	680 x 860 x 1230	8,0	3-phase2	150
LF 30/14	1400	30	320 x 320 x 320	710 x 930 x 1290	10,0	3-phase2	180
LF 60/14	1400	60	400 x 400 x 400	790 x 1080 x 1370	12,0	3-phase	270
LF 120/14	1400	120	500 x 500 x 500	890 x 1180 x 1470	18,0	3-phase	370

¹ External dimensions vary for versions with additional equipment.
² Heating only between two phases
* 3-phase: All ovens are available for supply voltages from 200 V to 240 V or 380 V to 480 V, 50 or 60 Hz.