Nabertherm Continuous Rotary Kiln 1100°C

Item number: NAB_8185

EAN: 4064343431781

Category: Nabertherm

Manufacturer: Nabertherm

starting from 19.970,00 €

Manufacturer’s suggested retail price: 19.970,00 €

Excluding 19% VAT. , plus shipping (Sperrgut)

(including 19% VAT. 23.764,29 €)

Model/ Controller

There are variations of this item. Please select the variation you wish.

Request for quote

Professional service

+49 30-403 667 940

International shipping

Description
Technical data

Nabertherm Rotary Kiln 1100°C, Models RSRC 80-500/11 - RSRC 120-1000/11
The rotary kilns of the RSRC series are particularly suitable for processes in which continuously passing charge material is heated for a short time.

The rotary kiln is tilted slightly and brought to the target temperature. The material is then continuously fed in at the upper end of the tube. It passes through the heated area of the tube and falls out of the tube at the lower end. The time of heat treatment is determined by the angle of inclination, the speed of rotation and the length of the working tube, as well as by the flow properties of the batch material.

Equipped with the optionally available closed charging system for 5 litres of charge material incl. collecting container, the rotary kiln can also be used for processes under protective gas or vacuum atmospheres.

Depending on the process, batch and required maximum temperature, different working tubes made of quartz glass, ceramic or metal are used. These rotary kilns can thus be adapted very flexibly for different purposes.

Tmax 1100 °C
- Working tube made of quartz glass, open on both sides
- Thermocouple type K
Heating elements freely radiating on support tubes
Housing made of textured stainless steel sheets
Infinitely variable drive from approx. 2-45 rpm
Digital display for the angle of inclination of the rotary kiln
Very easy removal due to beltless drive and hinged oven housing (opening temperature < 180 °C)
Compact system, oven mounted on base frame with
- manual spindle drive, with crank for presetting the inclination angle
- Controller and switchgear integrated
- Transport rollers
NTLog Basic for Nabertherm controller: recording of process data with USB stick

Additional equipment

Three-zone control to optimise temperature uniformity
Display of temperature in working tube with measurement via additional thermocouple
Batch control via additional thermocouple in the working tube
Different gas supply systems with good flushing of the batch with process gas in counterflow (only in combination with charging system see below)
Non-return valve at the gas outlet prevents ingress of false air
Vacuum version, depending on the pump used, up to 10 ^-2 mbar
Feeding system for continuous material feed, consisting of:
- Stainless steel feed hopper incl. electric vibration generator for optimising material feed into the working tube
- Electrically driven screw conveyor at the inlet of the working tube with a pitch of 10, 20 or 40 mm and adjustable speed between 0.28 and 6 revolutions/minute, gear reductions or ratios for other speed ranges on request
- Collection bottle made of laboratory glass at the outlet of the working tube
- Suitable for operation under gas atmosphere or vacuum
Working tubes made of different materials
Batch reactors made of quartz glass, Tmax 1100 °C
Electric linear drive to adjust the angle of inclination
Higher temperatures up to 1600 °C are available on request
PLC control for temperature control and control of the connected aggregates, e.g. switching and speed of the screw conveyor, speed of the working tube, switching of the vibration generator, etc.
Process control and documentation via VCD software package or Nabertherm Control Center NCC for monitoring, documentation and control.

3-zone version on request!

Heated length:	500 mm750 mm1000 mm
Width outside (oven):	2505 mm2755 mm3005 mm
Height outside (oven):	1655 mm1715 mm
Constant zone:	170 mm250 mm330 mm375 mm500 mm
Power (oven):	3,7 kW4,9 kW5,1 kW6,6 kW9,3 kW
Stove appliance type:	tube furnace
Oven temperature max.:	1100°C
Pipe diameter (outside):	80 mm110 mm
Pipe length:	1540 mm1790 mm2040 mm
Depth outside (oven):	1045 mm

Model	T max¹ [°C]	External dimensions² W x D x H [mm]	Max. Tube- diameter outside [mm]	Heated length [mm]	Length constant temperature¹ +/- 5 K [mm] 1-zone / 3-zone	Tube length [mm]	Connected load [kW]	Electrical connection^*	Weight [kg]
RSRC 80/500/11	1100	2505 x 1045 x 1655	80	500	170 / 250	1540	3,7	1-phase	555
RSRC 80/750/11	1100	2755 x 1045 x 1655	80	750	250 / 375	1790	4,9	3-phase3	570
RSRC 120/500/11	1100	2505 x 1045 x 1715	110	500	170 / 250	1540	5,1	3-phase3	585
RSRC 120/750/11	1100	2755 x 1045 x 1715	110	750	250 / 375	1790	6,6	3-phase4	600
RSRC 120/1000/11	1100	3005 x 1045 x 1715	110	1000	330 / 500	2040	9,3	3-phase4	605

RSRC 80/500/13	1300	2505 x 1045 x 1655	80	500	170 / 250	1540	6,3	3-phase4	555
RSRC 80/750/13	1300	2755 x 1045 x 1655	80	750	250 / 375	1790	9,6	3-phase4	570
RSRC 120/500/13	1300	2505 x 1045 x 1715	110	500	170 / 250	1540	8,1	3-phase4	585
RSRC 120/750/13	1300	2755 x 1045 x 1715	110	750	250 / 375	1790	12,9	3-phase4	600
RSRC 120/1000/13	1300	3005 x 1045 x 1715	110	1000	330 / 500	2040	12,9	3-phase4	605

¹ Indication outside the pipe. Difference to the temperature inside the pipe up to + 50 K.
² External dimensions vary for versions with additional equipment.
³ Heating only between phase 1 and the N conductor.
⁴ Heating only between two phases
^* 1phase: All furnaces are available for supply voltages from 110 V to 240 V, 50 or 60 Hz.
* 3-phase: All ovens are available for supply voltages from 200 V to 240 V or 380 V to 480 V, 50 or 60 Hz.

Note: Units with 3-zone version have a P-controller (see selection options in the variation menu).