Dräger X-plore ® bayonet filtersFilters for the two-filter, half and full face masks Dräger X-plore ® 3300, 3500 and 5500
ADVANTAGES:
- Dräger-specific bayonet connection
- easy installation:
unique filter guide and tactile point
- additional handling safety:
marks on mask and filter as well as the direction of arrow
- Rugged plastic housing
- Packed in pairs
- open only the required number of filter packaging
- More flexibility with modular accessories
- Compilation of combination filters of gas and particulate filters possible
- optional pre-filter for longer service life
variation label |
Filter |
characterizing color |
special |
|
particulate filter |
|
|
A |
Pad P1 NR |
white |
20 |
B |
Pad P2 R |
white |
20 |
C |
P3 R mit Gehäuse |
white |
22 |
D |
Pure P2 R |
white |
20 |
E |
Pure P3 R |
white |
20 |
F |
Pure Odour P3 R |
white |
20 |
|
|
|
|
|
gas filter |
|
|
G |
A1 |
brown |
20 |
H |
A2 |
brown |
20 |
I |
A2B2 |
brown, gray |
18 |
J |
A1B1E1 |
brown, gray, yellow |
20 |
K |
A1B1E1K1 |
brown, gray, yellow, green |
20 |
|
|
|
|
|
combination filter |
|
|
L |
A1 P3 R D |
brown, gray, white |
14 |
M |
A2 P3 R D |
brown, gray, white |
14 |
N |
A2B2 P3 R D |
brown, gray, white |
12 |
O |
A1B1E1K1 Hg P3 R D |
brown, gray, yellow, green, red, white |
14 |
P |
A2B2E2K2 Hg P3 R D (Only for use with full face mask) |
brown, gray, yellow, green, red, white |
10 |
characterizing color |
Filter type |
Main areas of application |
Brown |
AX1)
|
Gases and vapors of organic compounds, boiling point < 65 °C |
Brown |
A |
Gases and vapors of organic compounds, boiling point > 65 °C |
Gray |
B |
inorganic gases and vapors, such as chlorine, hydrogen sulfide, hydrogen cyanide (HCN) |
Yellow |
E |
Sulfur dioxide, hydrogen chloride |
Green |
K |
ammonia |
Black |
CO2)
|
carbon monoxide |
Red |
Hg3)
|
mercury vapor |
Blue |
NO4)
|
nitrous gases, including nitric oxide |
Orange |
Reaktor |
radioiodine, including radioactive iodomethane |
White |
P |
particle |
1) AX-filter may be used only in the delivery state (factory fresh). Reuse and use against gas mixtures is absolutely inadmissible.
2) CO filter may be used only once and must be disposed of after use.
3) Hg filters may acc. EN 14387 for max. 50 hours are used.
4) NO filter may be used only once and must be disposed of after use.
filter class |
capacity/ Separation efficiency |
Maximum allowable concentration of pollutants (according to EN Report 529, EN 14387) |
Maximum allowable concentration of pollutants (according to BGR 190, EN 14387) |
particulate filter |
|
|
|
1 |
small |
4 x Limit with half mask 5 x Limit with full face mask |
4 x Limit with half mask 4 x Limit with full face mask |
2 |
medium |
12 x Limit with half mask 16 x Limit with full face mask |
10 x Limit with half mask 15 x Limit with full face mask |
3 |
large |
48 x Limit with half mask 1.000 x Limit with full face mask |
30 x Limit with half mask 400 x Limit with full face mask |
|
|
|
|
gas filters |
|
|
|
1 |
small |
0,1 Vol.-% (1.000 ppm)* |
0,1 Vol.-% (1.000 ppm)** |
2 |
medium |
0,5 Vol.-% (5.000 ppm)* |
0,5 Vol.-% (5.000 ppm)** |
3 |
large |
1,0 Vol.-% (10.000 ppm)* |
1,0 Vol.-% (10.000 ppm)** |
* Up to 50 times the OEL with half mask / max. 2,000 x limit with full face mask.
** Max 30 times the OEL with half mask / max. 400 x limit with full face mask.
The values ??correspond to the specified sources. Other national or local regulations must be observed.