Densitometer DEN-1 is designed for measurement of cell suspension's turbidity in the range 0.3 - 5.0 McFarland units (100 × 10
6 - 150 × 10
7 cells/ml). The device provide the opportunity to measure solution turbidity in a wider range (up to 15.0 McFarland units) however, it is necessary to remember that in this case the standard deviation values increase.
A densitometer is used for measurement of cell concentration (bacterial, yeast cells) during fermentation process, determination of microorganism sensitivity to antibiotics, microorganism identification using various test-systems, for measurement of absorption at the definite wavelength, as well as for quantitative estimation of concentration of colour solution, absorbing green light.
The operation principle is based on measurement of optical density with digital presentation of results in McFarland units. The unit is calibrated at the factory (for operation with 18 mm diameter glass tubes) and keeps calibration without power supply. However, if necessary it is possible to calibrate the unit by 2 - 6 points in 0.5 - 5.0 McFarland unit range. Both commercial standards (e.g. produced by BioMerieux, Lachema, etc.) and the cell suspensions prepared in a laboratory can be used for calibration.
Following calibration kits are available on request:
- CKG16 for glass tubes with diameter 16 mm
- CKG18 for glass tubes with diameter 18 mm
Two versions of the product are available:
- DEN-1 powered from external energy supply inclusive A-16 Adapter
- DEN-1B powered both from external energy supply and from batteries (AA). Besides, DEN-1B operates with higher precision of measurements (up to 0,01 McF). inclusive A-16 Adapter
Analytical device:
|
turbidity meter
|
Width (Analytical instruments):
|
165 mm
|
Height (Analytical equipment):
|
75 mm
|
Depth (Analytical instruments):
|
115 mm
|
Shipping weight: |
1,10 Kg |
Product weight: |
0,90 Kg |