SIGMA 8K refrigerated floor standing centrifuge

Item number: SIGMA_22015

EAN: 4064343398879

Category: SIGMA

Manufacturer: Sigma Laborzentrifugen

starting from 34.925,00 €

Manufacturer’s suggested retail price: 34.925,00 €

Excluding 19% VAT. , plus shipping (Sperrgut)

(including 19% VAT. 41.560,74 €)
Cooling

There are variations of this item. Please select the variation you wish.


SIGMA 8K refrigerated floor standing centrifuge

  • Compact refrigerated floor standing centrifuge for universal use in blood banks, clinical laboratories and research
  • Capacity up to 6 l in angle rotor; 12 x 1 l, 6 x 1.5 l or 12 blood bags in swing-out rotor
  • Solid construction, suitable for continous use
  • Maintenance-free drive, high imbalance tolerance up to approx. 80 g
  • Speed range 100 - 10.500 rpm
  • Automatic rotor identification prevents spinning rotors overspeed
  • Efficient refrigeration; temperature adjustable between -20 °C and +40 °C, standstill cooling, with refrigerant R404a
  • Stainless steel chamber
  • The lid is hinged on the left hand side
  • Easy open the centrifuge lid via pneumatic springs
  • Two motorized lid locks provide safe, assured lid-locking
  • Power failure, emergency lid opening
  • Ergonomic loading height of just 88 cm
  • The user friendly control unit is integrated in the front panel
  • Centrifuge fits through a door opening of only 82 cm
  • The centrifuge stands on movable castors an adjustable feet to even out the floor
  • Easily serviceable
  • All international standards are met, e.g. IEC 1010, CE, WEEE

Rotor is not included in scope of delivery. Please order separately!


Dimensions (H x W x D) (centrifuges): 980 x 810 x 910 mm
Acoustic signal, switchable: yes
Display speed / g-force: speed and g-force
Display shows dimensions: yes
Acceleration max.: Rotor 12505: 80 sRotor 11800: 81 s
Linear acceleration curves: 10
Acceleration curves, quadratic: 10
Deceleration and brakeless: Combination from 1000 - 150 rpm selectable
Deceleration curves, linear: 10
Deceleration curves, quadratic: 10
Deceleration max.: Rotor 12505: 75 sRotor 11800: 59 s
Continous run: yes
Lid release / lid open: Auto lid open, switchableAuto lid release at the end of the run, switchable
Display (centrifuges): TFT
Speed max.: 10500 rpm
Speed min.: 100 rpm
Speed increments (Centrifuges): 10; 1 rpm
Calculation for liquid density: >1.2 g/cm3
User defined acceleration curves: 10
User defined deceleration curves: 10
Brakeless: yes
User defined program name: yes
Capacity of vessels: 1.5 ml2 ml4 ml5 ml7 ml10 ml12 ml15 ml25 ml30 ml40 ml50 ml80 ml85 ml100 ml125 ml175 ml200 ml250 ml500 ml1 l1.3 l1.5 l
Noise level at max. speed: Rotor 11800: 69 dB (A)Rotor 12505: 73 dB (A)
Weight without rotor: 420 kg
Height with open lid: 1690 mm
Capacity/capacity max.: 12 l
Kinetic energy max.: 279000 Nm
Short run: yes
Cooling, heating: cooling
Power consumption (centrifuges): 6500 W
Max. radius decreaseable  : yes
Optical display stillstand: yes
Programmes (centrifuges): 60
Rotors, pre programmed: All rotors pre programmed speed, g-force, radius 
Rotor temperature min.: less than 4 °C
Rotor type: special rotorswing-out rotorangle rotor
Fast cool program: Rapid cool
G-force increments: 10;1 xg
Safety (centrifuges): Start refused with exceeded temperature tolerance, tolerance preselectable4-digit code protection, free selectablePop up window end of rotor life time
Signal length preselectable: yes
Start delay: yes
Controller (Centrifuges): Control unit lockable
Standstill heating, switchable: yes, yes
Temperatur setting range: -20 °C to +40 °C
Temperature increments: 1 °C
Switchable °C, °F: yes
Time setting range: 10 sec - 99 h 59 min
Time increments: 60; 1 s
Timing after: set speed has been reached
Centrifuge type: floorstanding centrifuge
Counting cycles: Counting cycles centrifuge, each rotor
Shipping weight: 534,00 Kg
Product weight: 420,00 Kg
Model SIGMA 8KS
Power consumption [kW] 6,5
Max. capacity [l] 12
Max. speed [rpm] 10500
Min. speed [rpm] 100
Interference suppression EN 61326
Dimensions: Height x Width x Depth [mm] 980 x 810 x 910
Height with open lid [mm] 1690
Weight without rotor [kg] 420
Kinetic energy max. [K Nm] 279
Noise level at max. speed (approx.)
- Rotor 11800 [sec]
- Rotor 12505 [sec]


69 dB(A)
73 dB(A)

Max. acceleration
- Rotor 11800 [sec]
- Rotor 12505 [sec]


81
80

Max. deceleration
- Rotor 11800 [sec]
- Rotor 12505 [sec]


59
75

Teperature setting range -20°C - +40°C
Min. rotor temperature
at 23°C ambient temperature

< 4°C
Display TFT
Plain text pop up window +
Permanent display preselected, current values +
Languages D, GB
Timer 10 sec - 99 h 59 min
Timer after set speed has been reached +
Time increments [sec] 60; 1
Short run +
Continous run +
Speed increments [rpm] 10; 1
Display speed and g-force +
G-force increments [xg] 10; 1
Temperature increments [°C] 1
Switchable °C, °F +
Standstill cooling, switchable +, +
Rapid cooling program: Rapid_cool +
Start refused with exceeded temperature tolerance, tolerance preselectable +
Programs 60
User defined program name +
Program list shows all parameters +, +
Linear acceleration curves 10
Quadratic deceleration curves 10
User defined acceleration curves 10
Linear deceleration curves 10
Quadratic deceleration curves 10
User defined deceleration curves 10
Brakeless +
Combination deceleration a. brakeless from 1000 - 150 rpm selectable +
Auto lid open, switchable +
Accoustic signal, switchable +, +
Signal length preselectable +
Optical display stillstand +
Counting cycles centrifuge, each rotor +, +
Pop up window end of rotor life time +
Automatic lid opening at the end of the run, switchable +, +
All rotors are programmed: speed, g-force, radius +
Max. radius decreasealbe +
Calculation for liquid density >1.2g/cm3 +
Start delay +
Controlunit lockable +
Code protection +

Accessories

Rotors


Related products