iVISION Industrial Vacuum Cleaner iV2 FLAT TABLE 3 kW/310 m3/h

iVISION Aearial arm for iV2 FLAT TABLE

The aerial arm is highly recommended for every CNC router.
The use of this system reduces the risk of accidents due to obstruction of the tube on the sides of the machine.

iVISION Antistatic kit for FLAT TABLE/CLEAN/PCB-LINE
Especially recommended for pvc ships

To be applied to all models of industrial vacuums in production.
This kit allows you to unload electrostatic charges accumulated during the collection phase, avoiding transferring them to other machinery or operators.
It's particularly recommended during the working of aluminum, considering the chips of this material can create a potentially explosive atmosphere inside of the tank.

iVISION Cyclonic prefilter
To protect the M class filter

Strongly recommended whenever possible, the pre-filter is positioned between the vacuum and the chip-generating machine, as the first point of collection of the collected material.
It is specially used to preserve the life of the filter inside the vacuum unit.
It retains most of the collected material and can have a cone or cylindric shape and serves as a mechanical filter.
Through a tangential entry the collected material is centrifuged into its interior until its speed gradually decreases and the material gradually falls to the bottom of the collecting unit due to the force of gravity.
Such a process ensures that only a relatively low percentage of collected dust or chips manages to actually reach the real filter positioned in the upper part of the vacuum cleaner.

The cyclonic pre-filter becomes almost mandatory for fine or very fine powders, which are very likely to clog the filter quickly, compromising the smooth operation of the entire system, but are only recommended for large, heavy chips.
The main advantage of the cyclonic pre-filter is to protect the filter of the vacuum cleaner from quickly clogging, thus extending its life before replacement and significantly reducing the maintenance of the entire system.

iVISION 500 liter dumpster with manual opening

In the case that the vacuum cleaner standard capacity 160 liter is not enough, iVision offers its customers additional high-capacity chip containers.
This dumpster are equipped with a visual filling indicator that shows the operator when it is time to empty the container.

iVISION Cleaning kit stainless steel Ø 50 mm

The cleaning kit is usable on all of the series and consists of a robust, anti-abrasion tube that ends at the extremities with special zinc-plated steel accessories capable of transporting, without any obstacle, chippings and oil from the machine tool to the vacuum collection tank.
The suction tube comes housed inside a support in order to facilitate the movement of the vacuum in the workshop without being an obstable for the operator, it allows the avoidance of leakage of oil during the maneuvers of the vacuum.

iVISION Kit for inserting PVC bags in chip containers

iVISION Hose SUPERFLEX medium Ø 100 mm, 5 meters

iVISION Lift kit for series iV2

The lifting device is used for emptying the 100 liter (iV2 model) chip container with the use of a forklift.
The operators do not have to make any effort for the emptying process. At the sides of the collecting containers there are two hooks for the lifting kit to be connected to, which in turn is lifted from the truck by a chain.