ElectroHEAT Standard heating hood series SH, 2 lThe ElectroHEAT E & E heaters of the series SH are handmade. They have a crocheted inner and outer mantle made of glass fibers and are used to heat liquids in round bottom flasks.
The heat conductor is made of a NiCr alloy 8020. It is wrapped by a glass fiber tube and is crocheted with a yarn of glass fibers in the inner jacket of the heating hood. Thus, the heat is evenly distributed to the glass flask. The glass fiber tube and the glass yarn also serve as insulation. To ensure that no or only a little heat can reach the outer jacket, the heating hood is insulated inside with glass wool.
- Has a bottom hole with a diameter of 60 mm.
- Has 2 heating zones and a heating zone switch.
- Is delivered as standard with 4 fastening hooks, so that the heating hoods can be mounted on a tripod.
- The nominal voltage is 230 V.
- The heating conductor temperature can reach a maximum of 450 ° C.
- Delivered with a safety plug with 1.50 meter cable length.
- Protection class I, degree of protection IP00.
- With a personal protection adapter.
Heating capacity (heating technology):
|
700 W
|
Heating places (heating technology:
|
one place
|
Heating technology:
|
heating mantle
|
Protection class (heating technology):
|
IP00
|
Max. temperature (heating technology):
|
450°C
|
Capacity (heating mantle):
|
1.1 l - 5 l
|
Shipping weight: |
5,00 Kg |