BINDER CO2 Incubator C170-230V/120V

Item number: BIND_6001!

EAN: 4064343309134

Category: Incubators, Drying Cabinets

Manufacturer: Binder

Now only 7.023,45 €

Manufacturer’s suggested retail price: 7.393,10 €

Excluding 19% VAT. , plus shipping (Sperrgut)

(including 19% VAT. 8.357,90 €)

Power supply, Door hinge

There are variations of this item. Please select the variation you wish.

Request for quote

Professional service

+49 30-403 667 940

International shipping

Description
Technical data

BINDER CO₂ Incubator C170-230V/120V

BINDER CO₂ incubators ensure optimal and reproducible conditions for cell cultivation. With a highly effective decontamination concept, comprehensive equipment, as well as all the necessary options, the new C 170 series reliably covers every basic requirement when it comes to everyday work in the laboratory. Featuring the same footprint as the previous model, this sophisticated series of units offers a particularly large amount of space for incubating cell and tissue cultures successfully.

The efficiency marvel with 170-lite r capacity:

Minimum footprint - maximum usable space
Uncompromising hot air sterilization
Fanless, hygienic interior
Sophisticated design for optimum stacking capability

Important characteristics:

Temperature range: room temperature plus 7 °C to 50 °C
Humidity range: 90...95 % RH
Auto-sterilization with hot air at 180 °C
Humidification system with condensation protection
CO₂gas-mixing jet with Venturi effect
CO₂sensor with infrared technology
Tightly-sealed inner door made of tempered safety glass
Seamless, deep-drawn inner stainless steel chamber
3 perforated stainless steel shelves
Units are stackable with stacking adapter
Troubleshooting system with visual and audible alarms
Zero-voltage alarm contact
Door hinged right or left

Width outside (incubators,...):	740 mm
Width inside (incubators,...):	560 mm
Maximum temperature (heat):	+ 50 °C
Height outside (incubators,...):	870 mm
Height inside (incubators,...):	600 mm
Incubator model:	CO2 incubator
Interior volume:	101 - 200 l
Cabinet type:	incubator
Depth outside (incubators,...):	715 mm
Depth inside (incubators,...):	500 mm
Shipping weight:	140,00 Kg
Product weight:	140,00 Kg

BINDER CO₂ Incubator	C170-230V
Exterior dimensions
Width (mm)	740
Height (incl. feet) (mm)	870
Depth (mm)	715
Wall clearance, rear (mm)	100
Wall clearance, side (mm)	50
Interior dimensions
Width (mm)	560
Height (mm)	600
Depth (mm)	500
Interior volume (l)	168
Load per rack (kg)	10
Weight (kg)	110
Temperature data
Temperature range from 7 °C above ambient temperature to (°C)	50
Temperature variation at 37 °C (± K)	0,3
Temperature fluctuation (± K)	0,1
Recovery time after door was opened for 30 sec. at 37 °C (min) 1)	6
CO₂ data
CO₂ range (Vol.-% CO₂)	0-20
Recovery time after door was opened for 30 sec. 5 vol. % (min.) 1) 2)	5
CO₂ measurement	IR
Humidity data
Humidity (±2 % RF)	90...95
Electrical data
Rated Voltage (V)	230
Power frequency (Hz)	50 / 60
Nominal power (kW)	1,1
Unit fuse (A)	10
Phase (Nominal voltage)	1~
Inner doors	1
Unit doors	1 Door hinged right or left
Energy consumption at 37 °C (Wh/h)	90

Information on product safety

Manufacturer information:

Binder GmbH
Im Mittleren Ösch 5
78532 Tuttlingen, Deutschland
[email protected]

Responsible person:

Mr. Schuldt
0049 30 403 667 940
[email protected]

BINDER CO2 Incubator C170-230V/120V

Category: Incubators, Drying Cabinets

Accessories

Related products

Question about product

Request offer