BINDER Cooled incubator KB 115 (E3.1)

Item number: BIND_6042!

EAN: 4064343305280

Category: BINDER

Manufacturer: Binder

6.827,00 €

Manufacturer’s suggested retail price: 6.827,00 €

Excluding 19% VAT. , plus shipping (Sperrgut)

(including 19% VAT. 8.124,12 €)

Power supply

There are variations of this item. Please select the variation you wish.

Request for quote

Professional service

+49 30-403 667 940

International shipping

Description
Technical data

BINDER Cooled incubator KB 115 (E3.1) with mechanical convection

The most versatile among the cooled incubators for microorganisms: The BINDER KB series cooled incubator controls temperature ranges of -5 °C to 100 °C. With its comprehensive program functions, this cooled incubator offers a wide range of capabilities and delivers reproducible test results.

Electronically controlled APT.line^TM preheating chamber and patented DCT^TM refrigeration system assuring temperature accuracy and reproducible results in both heating and cooling situations
Temperature range -5 °C to 100 °C
MP controller with 2 programs with 10 sections each, alternatively switchable to 1 program with 20 sections
Integrated week program timer with real-time function
Adjustable ramp function via program editor
Digital temperature setting with an accuracy of a tenth of a degree
Adjustable fan speed
Elapsed time indicator
Independent adjustable temperature safety device class 3.1, providing full protection against chamber over-temperature, with visual and audible alarm
Inner glass door
RS 422 interface for communication software APT-COM^TM DataControlSystem
Adjustable intervals for printer
Units up to 115 liters are stackable
2 shelves, stainless steel
BINDER test confirmation

Load max.:	11 - 50 kg
Width outside (incubators,...):	835 mm
Width inside (incubators,...):	600 mm
Maximum temperature (heat):	+ 100 °C
Height outside (incubators,...):	1025 mm
Height inside (incubators,...):	480 mm
Incubator model:	cooling incubator
Interior volume:	101 - 200 l
Cabinet type:	incubator
Depth outside (incubators,...):	730 mm
Depth inside (incubators,...):	400 mm
Lowest temperature (cooling):	- 5 °C

BINDER cooling incubator	KB 115
Exterior dimensions
Width (mm)	835
Height (incl. feet) (mm)	1025
Depth (incl. door handle, I-panel and connection 100 mm) (mm)	730
Wall clearance, rear (mm)	100
Wall clearance, side (mm)	160
Number of doors (ea.)	1
Inner glass door(s) (ea.)	1
Interior dimensions
Width (mm)	600
Height (mm)	480
Depth (mm)	400
Interior volume (l)	150
Racks (number standard/max.)	2 / 5
Load per rack (kg)	20
Permitted total load (kg)	50
Weight (empty) (kg)	105
Temperature data
Temperature range (°C) 1)	-5 - 100
Temperature variation at 5 °C (± K) at 25 °C (± K) at 40 °C (± K)	0,4 0,1 0,2
Temperature fluctuation max. (± K)	0,1
Recovery time after door was opened for 30 sec 2) at 5 °C (± K) at 40 °C (± K)	5 1
Electrical data
IP protection class acc. to EN 60529	IP 20
Voltage (±10 %) 50/60 Hz (V) 60 Hz (V)	230 1 N ~ 115 1 N ~
Nominal power (kW)	0,46
Energy consumption 3) at 37 °C (W)	115
Noise level (dB (A))	47

1) Lower values are valid up to an ambient temperature of max. 25 °C.
2) To 98% of the set value
3) These values can be used for dimensioning air condition systems.

The useable interior height depends on the position of racks.

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.

BINDER Cooled incubator KB 115 (E3.1)

Category: BINDER

Accessories

Related products

Question about product

Request offer