BINDER Cooled incubator KB 720 (E5.1)

Item number: BIND_6045!

EAN: 4064343304924

Category: BINDER

Manufacturer: Binder

Now only 12.347,72 €

Manufacturer’s suggested retail price: 12.997,60 €

Excluding 19% VAT. , plus shipping (Sperrgut)

(including 19% VAT. 14.693,79 €)

Power supply

There are variations of this item. Please select the variation you wish.

Request for quote

Professional service

+49 30-403 667 940

International shipping

Description
Technical data

BINDER Cooled incubator KB 720 (E5.1) with mechanical convection

The most versatile among the cooled incubators for microorganisms: The BINDER KB series cooled incubator controls temperature ranges of -5 °C to 100 °C. With its comprehensive program functions, this cooled incubator offers a wide range of capabilities and delivers reproducible test results.

Electronically controlled APT.line^TM preheating chamber and patented DCT^TM refrigeration system assuring temperature accuracy and reproducible results in both heating and cooling situations
Temperature range -5 °C to 100 °C
MP controller with 2 programs with 10 sections each, alternatively switchable to 1 program with 20 sections
Integrated week program timer with real-time function
Adjustable ramp function via program editor
Digital temperature setting with an accuracy of a tenth of a degree
Adjustable fan speed
Elapsed time indicator
Independent adjustable temperature safety device class 3.1, providing full protection against chamber over-temperature, with visual and audible temperature alarm
Inner glass door
RS 422 interface for communication software APT-COM^TM DataControlSystem
Adjustable intervals for printer
4 castors (2 with brakes)
Access port with silicone plug Ø 30 mm, left side
2 stainless steel racks
BINDER test confirmation

Load max.:	101 - 150 kg
Width outside (incubators,...):	1255 mm
Width inside (incubators,...):	970 mm
Maximum temperature (heat):	+ 100 °C
Height outside (incubators,...):	1925 mm
Height inside (incubators,...):	1250 mm
Incubator model:	cooling incubator
Interior volume:	601 - 700 l
Cabinet type:	incubator
Depth outside (incubators,...):	970 mm
Depth inside (incubators,...):	576 mm
Lowest temperature (cooling):	- 5 °C

BINDER cooling incubator	KB 720 (E5.1)
Exterior dimensions
Width (mm)	1255
Height (incl. casters) (mm)	1925
Depth (plus door handle, I-panel and connection 100 mm) (mm)	970
Wall clearance, rear (mm)	100
Wall clearance, side (mm)	100
Number of doors (ea.)	2
Inner glass door(s) (ea.)	2
Interior dimensions
Width (mm)	970
Height (mm)	1250
Depth (mm)	576
Interior volume (l)	698
Racks (number standard/max.)	2 / 15
Load per rack (kg)	45
Permitted total load (kg)	150
Weight (empty) (kg)	309
Temperature data
Temperature range (°C) 1)	-5 - 100
Temperature variation max. (± K) at 4 °C (± K) at 25 °C (± K) at 37 °C (± K)	0,5 0,2 0,2 0,2
Temperature fluctuation max. (± K)	0,1
Recovery time after door was opened for 30 sec 2) at 4 °C (± K) at 37 °C (± K)	12 2
Electrical data
IP protection class acc. to EN 60529	IP 20
Voltage (±10 %) 50/60 Hz (V) 50/60 Hz (V)	200-240 V 1N ~ 100-120 V 1N ~
Nominal power at 240 V (kW)	2,3
Energy consumption 3) at 37 °C (W)	510
Noise level (dB (A))	53

1) Lower values are valid up to an ambient temperature of max. 25 °C.
2) To 98% of the set value
3) These values can be used for dimensioning air condition systems.

The useable interior height depends on the position of racks.

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.

BINDER Cooled incubator KB 720 (E5.1)

Category: BINDER

Accessories

Related products

Question about product

Request offer