BINDER Dynamic climate chamber MK 56, 200-240 V 1 ph 60 Hz

Item number: S-154B

EAN: 4064343072205

Category: Incubators, Drying Cabinets

Manufacturer: Binder

16.950,00 €

Manufacturer’s suggested retail price: 16.950,00 €

Excluding 19% VAT. , plus shipping (Sperrgut)

(including 19% VAT. 20.170,49 €)

Power supply

Request for quote

Professional service

+49 30-403 667 940

International shipping

Description
Technical data

BINDER Dynamic climate chamber MK 56, 200-240 V 1 ph 60 Hz
Dynamic climate chambers for rapid temperature changes

The BINDER MK series chamber is suitable for all heat and cold tests between -40 °C and 180 °C. The MK is a clever alternative to complex individual solutions for cyclical temperature tests.

BENEFITS

Homogeneous climate conditions thanks to APT.line technology
Comprehensive programming and data acquisition
Large heated viewing window

MAIN FEATURES

Temperature range: -40 °C to 180 °C
APT.line preheating chamber technology
Programmable condensation protection for test material
Heated viewing window with LED interior lighting
BINDER APT-COM 3 Basic Edition communication software
Troubleshooting system with visual and audible alarms
Intuitive touchscreen controller with time-segment and real-time programming with internal data recording
Access port with silicone plug, 50 mm, left
4 castors, two with brakes
Computer interface: Ethernet
230 V power socket on the right-side control panel
Adjustable ramp function
Integrated chart recorder
Real-time clock
1 stainless steel rack
BINDER test confirmation
Inner chamber made of stainless steel
Pt 100 temperature sensor
Thermal insulation using PUR foam
CFC-free refrigerant R-404A
Cooling with compressor cooling unit
Fin evaporator

Load max.:	51 - 100 kg
Width outside (incubators,...):	720 mm
Width inside (incubators,...):	400 mm
Maximum temperature (heat):	+ 180 °C
Height outside (incubators,...):	1445 mm
Height inside (incubators,...):	420 mm
Interior volume:	51 - 100 l
Cabinet type:	climate chamberdynamic climate chamber
Depth outside (incubators,...):	780 mm
Depth inside (incubators,...):	348 mm
Lowest temperature (cooling):	- 40 °C
Shipping weight:	165,00 Kg
Product weight:	165,00 Kg
Dimensions:	× × cm

BINDER Dynamic climate chamber	MK 56-230V¹⁾	MK 56-240V¹⁾
Performance Data Temperature
Temperature range [°C]	-40...180	-40...180
Temperature variation depending on setpoint [± K]	0.5...1.5	0.5...1.5
Temperature fluctuation depending on setpoint [± K]	0.1...0.5	0.1...0.5
Average heating-up rate according to IEC 60068-3-5 [K/min]	5.5	5.5
Cooling down time from 180 °C to -40 °C [min]	90	90
Average cooling down time according to IEC 60068-3-5 [K/min]	5.5	5.5
Max. heat compensation at 25 °C [W]	800	800
Electrical data
Rated Voltage [V]	200...230	200...240
Power frequency [Hz]	50	60
Nominal power [kW]	2.8	2.8
Unit fuse [A]	16	16
Phase (Nominal voltage) [ph]	1	1
Outer dimensions not incl. fittings and connections
Width net [mm]	720	720
Height net [mm]	1445	1445
Depth net [mm]	780	780
Wall clearance back [mm]	300	300
Wall clearance sidewise [mm]	200	200
Viewing window width [mm]	288	288
Viewing window height [mm]	255	255
Doors
Inner doors	1	1
Unit doors	1	1
Internal Dimensions
Width [mm]	400	400
Height [mm]	420	420
Depth [mm]	348	348
Measures
Interior volume [L]	60	60
Net weight of the unit (empty) [kg]	165	165
permitted load [kg]	60	60
Load per rack [kg]	15	15
Environment-specific data
Sound-pressure level [dB(A)]	59	59
Fixtures
Number of shelves (std./max.)	1/4	1/4

¹⁾ All technical data is specified for unloaded units with standard equipment at an ambient temperature of +22 °C ±3 °C and a power supply voltage fluctuation of ±10 %. The temperature data is determined in accordance to BINDER factory standard following DIN 12880, observing the recommended wall clearances of 10 % of the height, width, and depth of the inner chamber. Technical data refers to 100 % fan speed. All indications are average values, typical for units produced in series. We reserve the right to change technical specifications at any time.

Information on product safety

Manufacturer information:

Binder GmbH
Im Mittleren Ösch 5
78532 Tuttlingen, Deutschland
[email protected]

Responsible person:

Mr. Schuldt
0049 30 403 667 940
[email protected]

BINDER Dynamic climate chamber MK 56, 200-240 V 1 ph 60 Hz

Category: Incubators, Drying Cabinets

Accessories

Related products

Question about product

Request offer