BINDER FED 720 Heating chamber with mechanical convection - ProfiLab24 GmbH
99
100
24
4
stars -
Professional service
Customer
Young team with a lot of ambition and quick answers to all questions. We needed a complete laboratory equipment for our new location. The team of Profiab24 has arranged everything.
BINDER FED 720 Heating chamber with mechanical convection
Item number: BIND_6090!
EAN: 4064343300551
Manufacturer:
Binder
Now only
7.111,23 €
Manufacturer’s suggested retail price:
7.485,50 €
Excluding 19% VAT. ,
plus
(Sperrgut)
(including 19% VAT. 8.462,36 €)
BINDER FED 720 Heating chamber with mechanical convection. Order online at ProfiLab24 .com with top advice and 24/7 service. Fast delivery. Secure payment.
BINDER FED 720 Heating chamber with mechanical convection
The multi-talented BINDER heating chamber of the FED series provides almost unlimited capacity and is particularly adaptable. With advanced timing functions and a digitally controllable fan, this heating chamber easily controls temperature and convection conditions.
- Electronically controlled APT.lineTM preheating chamber assuring temperature accuracy and reproducible results
- Temperature range from 5 °C above ambient temperature to 300 °C
- MS controller with several timer functions
- Controller timer functions: delayed ON, delayed OFF, temperature dependent delayed OFF
- Digital temperature setting with an accuracy of one degree
- Adjustable fan speed
- Front ventilation flap slide and rear exhaust duct Ø 50 mm (1.97 inch)
- Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
- RS 422 interface for use with APT-COMTM DataControlSystem communication software or switch over to printer output with RS 232 / RS 422 interface converter
- Units up to 115 liters are stackable
- 2 chrome-plated racks included
- BINDER test confirmation
|
Load max.:
|
101 - 150 kg
|
|
Width outside (incubators,...):
|
1235 mm
|
|
Width inside (incubators,...):
|
1000 mm
|
|
Maximum temperature (heat):
|
+ 300 °C
|
|
Height outside (incubators,...):
|
1530 mm
|
|
Height inside (incubators,...):
|
1200 mm
|
|
Interior volume:
|
601 - 700 l
|
|
Cabinet type:
|
heating oven
|
|
Depth outside (incubators,...):
|
865 mm
|
|
Depth inside (incubators,...):
|
600 mm
|
| BINDER Heating chamber |
FED 720 |
| Exterior dimensions |
|
| Width (mm) |
1235 |
| Height (incl. feet) (mm) |
1530 |
| Depth (mm) |
865 |
| Plus door handle, I-panel, connection (mm) |
105 |
| Wall clearance, rear (mm) |
100 |
| Wall clearance, side (mm) |
160 |
| Exhaust duct (outer Ø mm) |
52 |
| Steam space volume (l) |
869 |
| Number of doors (ea.) |
2 |
| Interior dimensions |
|
| Width (mm) |
1000 |
| Height (mm) |
1200 |
| Depth (mm) |
600 |
| Interior volume (l) |
720 |
| Racks (number standard/max.) |
2 / 15 |
| Load per rack (kg) |
45 |
| Permitted total load (kg) |
120 |
| Weight (empty) (kg) |
195 |
| Temperature data |
|
| Temperature range approx. 5 °C above ambient temperature to (°C) |
300 |
Temperature variation 1)
at 70 °C (± K)
at 150 °C (± K)
at 300 °C (± K) |
1
2
5,5 |
| Temperature fluctuation at 70 °C (± K) |
0,3 |
Warm-up time 1)
to 70 °C (min)
to 150 °C (min.)
to 250 °C (min) |
25
39
65 |
Recovery time after doors were open for 30 sec. 1)
at 70 °C (min)
at 150 °C (min)
at 300 °C (min) |
2
20
24 |
| Ventilation data |
|
Ventilation
at 70 °C (x/h)
at 150 °C (x/h)
at 300 °C (x/h) |
11
12
10 |
| Electrical data |
|
| IP protection class acc. to EN 60529 |
IP 20 |
| Voltage (± 10%) 50 / 60 Hz (V) |
400, 3 N ~ |
| Nominal power (kW) |
5 |
Energy consumption
at 70 °C (W)
at 150 °C (W)
at 300 °C (W) |
570
1320
2600 |
|
1)to 98% of the set value
All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.
