BINDER Incubator B 28 with temperature safety device

Item number: BIND_6028!

EAN: 4064343306454

Category: Incubators, Drying Cabinets

Manufacturer: Binder

Now only 1.322,97 €

Manufacturer’s suggested retail price: 1.392,60 €

Excluding 19% VAT. , plus shipping (Sperrgut)

(including 19% VAT. 1.574,33 €)


BINDER Incubator B 28 with mechanical control, with independent temperature safety device class 1 (DIN 12880)

With the B series incubator, you obtain a reliable and powerful unit in a solid configuration at a very attractive price.
Temperature range 30 °C (86 °F) up to 70 °C (158 °F)
  • Mechanical control
  • Hydro-mechanical thermostat
  • With independent temperature safety device class 1 (DIN 12880)
  • Inner glass door
  • 2 chrome-plated racks included
  • Units are stackable
  • BINDER test confirmation

Load max.: 11 - 50 kg
Width outside (incubators,...): 580 mm
Width inside (incubators,...): 400 mm
Maximum temperature (heat): + 70 °C
Height outside (incubators,...): 405 mm
Height inside (incubators,...): 280 mm
Incubator model: incubator
Interior volume: up to 50 l
Depth outside (incubators,...): 425 mm
Depth inside (incubators,...): 250 mm
Shipping weight: 28,00 Kg
Product weight: 23,00 Kg
Dimensions: × × cm
BINDER incubator B 28
Exterior dimensions
Width (mm) 580
Height (incl. feet) (mm) 405
Depth (mm) 425
Plus door handle, I-panel, connection (mm) 85
Wall clearance, rear (mm) 100
Wall clearance, side (mm) 160
Number of doors (ea.) 1
Interior dimensions
Width (mm) 400
Height (mm) 280
Depth (mm) 250
Interior volume (l) 28
Racks (number standard/max.) 2 / 4
Load per rack (kg) 10
Permitted total load (kg) 25
Weight (empty) (kg) 23
Temperature data
Temperature range from 5 °C above ambient temperature to (°C) 30 - 70
Temperature fluctuation at 37 °C (± K) 1
Electrical data
IP protection class acc. to EN 50529 IP 20
Voltage (±10 %) 50/60 Hz (V) 230
Nominal power (kW) 0,25

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.

Information on product safety
Manufacturer information:
Binder GmbH
Im Mittleren Ösch 5
78532 Tuttlingen, Deutschland
[email protected]
Responsible person:
Mr. Schuldt
0049 30 403 667 940
[email protected]