BINDER Incubator BF 400 with mechanical convectionThe BINDER incubator of the BF series with mechanical convection is suitable for all gentle incubation applications, particularly under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery times.
- Electronically controlled APT.lineTM preheating chamber assuring temperature accuracy and reproducible results
- Temperature range from 5 °C above room temperature to 100 °C
- Digital temperature setting with an accuracy of a tenth of a degree
- MS controller with several timer functions
- Controller time functions:
- 0 to 99 h 59 min delayed ON
- 0 to 99 h 59 min delayed OFF
- 0 to 99 h 59 min temperature-dependent
- delayed OFF
- Adjustable fan speed
- Adjustable ventilation by means of front ventilation flap slide and rear exhaust Ø 50 mm
- Inner glass door
- Independent temperature safety device class 3.1 (DIN 12880) with optical alarm
- RS 422 interface for use with APT-COMTM DataControlSystem communication software or switch over to printer output with RS 232 / RS 422 interface converter
- Adjustable intervals for printer
- 2 chrome-plated racks included
- BINDER test confirmation
Load max.:
|
51 - 100 kg
|
Width outside (incubators,...):
|
1235 mm
|
Width inside (incubators,...):
|
1000 mm
|
Maximum temperature (heat):
|
+ 100 °C
|
Height outside (incubators,...):
|
1025 mm
|
Height inside (incubators,...):
|
800 mm
|
Incubator model:
|
incubator
|
Interior volume:
|
301 - 400 l
|
Cabinet type:
|
incubator
|
Depth outside (incubators,...):
|
765 mm
|
Depth inside (incubators,...):
|
500 mm
|
BINDER incubator |
BF 400 |
Exterior dimensions |
|
Width (mm) |
1235 |
Height (incl. feet) (mm) |
1025 |
Depth (mm) |
765 |
Plus door handle and connection (mm) |
105 |
Wall clearance, rear (mm) |
100 |
Wall clearance, side (mm) |
160 |
Exhaust duct (outer Ø mm) |
52 |
Steam space volume (l) |
457 |
Number of doors (ea.) |
2 |
Interior dimensions |
|
Width (mm) |
1000 |
Height (mm) |
800 |
Depth (mm) |
500 |
Interior volume (l) |
400 |
Racks (number standard/max.) |
2 / 10 |
Load per rack (kg) |
35 |
Permitted total load (kg) |
90 |
Weight (empty) (kg) |
145 |
Temperature data |
|
Temperature range from 5 °C above ambient temperature to (°C) |
100 |
Temperature variation at 37 °C (± K) at 50 °C (± K) |
0,4 0,9 |
Temperature fluctuation at 37 °C (± K) at 50 °C (± K) |
0,2 0,2 |
Warm-up time 1) to 37 °C (± K) to 50 °C (± K) |
18 26 |
Recovery time after doors were open for 30 sec. 1) at 37 °C (± K) at 50 °C (± K) |
2 4 |
Ventilation at 70 °C (x/h) |
17 |
Electrical data |
|
IP protection class acc. to EN 60529 |
IP 20 |
Voltage (±10 %) 50/60 Hz (V) 60 Hz (V) |
230 115 |
Nominal power (kW) |
0,85 |
Energy consumption at 37 °C (W) |
56 |
1) To 98% of the set value
All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.