BINDER Material test chamber FP 53

Item number: BIND_6051!

EAN: 4064343302951

Category: BINDER

Manufacturer: Binder

Now only 2.957,35 €

Manufacturer’s suggested retail price: 3.113,00 €

Excluding 19% VAT. , plus shipping (Sperrgut)

(including 19% VAT. 3.519,25 €)

Power supply

There are variations of this item. Please select the variation you wish.

Request for quote

Professional service

+49 30-403 667 940

International shipping

Description
Technical data

BINDER Material test chamber FP 53 with mechanical convection

A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and particularly fast heating - even for chambers under full loads.

Electronically controlled APT.line^TM preheating chamber assuring temperature accuracy and reproducible results
Temperature range from 5 °C above ambient temperature to 300 °C
MP controller with 2 programs with 10 sections each, or alternatively 1 program with 20 sections
The time of an individual program step can be set to max. 99.59 hours or 999.59 hours. This adjustment applies to all program sections
- Integrated weekly program timer with real-time function
Adjustable ramp function via program editor
Digital temperature setting with an accuracy of one degree
Adjustable fan speed
Adjustable ventilation by means of front ventilation flap slide and rear exhaust Ø 50 mm
Elapsed time indicator
Independent adjustable temperature safety device class 2 (DIN 12880), with visual temperature alarm
RS 422 interface for use with APT-COM^TM DataControlSystem communication software or switch over to printer output with RS 232 / RS 422 interface converter
Units up to 115 liters are stackable
2 chrome-plated racks included
BINDER test confirmation

Load max.:	11 - 50 kg
Width outside (incubators,...):	635 mm
Width inside (incubators,...):	400 mm
Maximum temperature (heat):	+ 300 °C
Height outside (incubators,...):	620 mm
Height inside (incubators,...):	400 mm
Interior volume:	51 - 100 l
Cabinet type:	material test chamber
Depth outside (incubators,...):	575 mm
Depth inside (incubators,...):	340 mm

BINDER Material test chamber	FP 53
Exterior dimensions
Width (mm)	635
Height (incl. feet) (mm)	620
Depth (mm)	575
Plus door handle and connection (mm)	105
Wall clearance, rear (mm)	100
Wall clearance, side (mm)	160
Exhaust duct (outer Ø mm)	52
Steam space volume (l)	77
Number of doors (ea.)	1
Interior dimensions
Width (mm)	400
Height (mm)	400
Depth (mm)	340
Interior volume (l)	53
Racks (number standard/max.)	2 / 5
Load per rack (kg)	15
Permitted total load (kg)	40
Weight (empty) (kg)	45
Temperature data
Temperature range approx. 5 °C above ambient temperature to(°C)	300
Temperature variation ¹) at 70 °C (± K) at 150 °C (± K) at 300 °C (± K)	0,8 2 3,7
Temperature fluctuation (± K)	0,3
Warm-up time ¹) to 70 °C (min.) to 150 °C (min.) to 250 °C (min.)	6 24 45
Recovery time after doors were open for 30 sec. ¹) at 70 °C (min.) at 150 °C (min.) at 300 °C (min.)	2 5 10
Ventilation data
Ventilation at 70 °C (x/h) at 150 °C (x/h) at 300 °C (x/h)	59 64 53
Electrical data
IP protection class acc. to EN 60529	IP 20
Voltage (± 10%) 50 / 60 Hz (V)	230, 1 N ~
Nominal power (kW)	1,2
Energy consumption at 70 °C (W) at 150 °C (W) at 300 °C (W)	145 300 720

¹) To 98% of the set value

All technical data are specified for units with standard equipment at an ambient temperature of 25 °C and a line voltage fluctuation of ±10%. The temperature data is determined in accordance to factory standard following DIN 12880, respecting the recommended wall clearances of 10% of the height, width and depth of the inner chamber. All figures are typical average values for series devices. We reserve the right to alter technical specifications at any time.

BINDER Material test chamber FP 53

Category: BINDER

Accessories

Related products

Question about product

Request offer