Memmert humidity chamber HC
P Active humidity control creates a controlled environment for accelerated life tests and 85/85 tests.
Perfect environmental simulation in the humidity chamberThis climate chamber offers the full range of comfort, reliability and safety. Thanks to active humidity control from 20% to 95% rh and unsurpassed homogeneity of temperature and humidity over the entire interior, it is ideally suited for environmental testing, environmental simulation, accelerated life tests and 85/85 tests according to IEC 60068-2-67 and IEC 60068-2-78.
- Temperature range up to +90 °C
- 4 model sizes (56 to 241 litres interior volume)
- 1 model variant: TwinDISPLAY
- Active humidity control 20 to 95% rh
- Double doors as standard: Prevention of contamination and temperature drops or rises and at the same time an optimal view of the sensitive material to be tempered through a full-surface, heated inner glass door
Humid environment without condensation in the humidity chamberIn this attractively priced and practically maintenance-free climate chamber, the active humidity control ensures ideal homogeneity of temperature and humidity as well as short recovery times after opening the door. In combination with heating on all six sides, including a heated interior glass door, it also minimizes evaporation in the interior and thus the risk of condensation water dripping onto the test specimen. An aluminium heat-conducting jacket serves as a heat accumulator in the event of a temporary power failure and supports optimum temperature distribution.
Comfort equipment for accelerated life cycle tests To ensure thatenvironmental tests and accelerated life cycle tests such as 85/85 tests are carried out reliably and safely, the HCP humidity chamber offers a wide range of comfort functions: Standard feed-through on the rear wall, battery-buffered ControlCOCKPIT (option), process runtime starts with SetpointWAIT function only when the setpoint temperature is reached, alarm messages can be sent via MobileALERT as e-mail or SMS (option) and much more.
A Memmert humidity chamber offers unique advantages
- User-friendly, intuitive operating concept
- Precise and homogeneous temperature control through product-specific heating concept
- Wide range of options for programming and documentation of different temperature/humidity profiles via AtmoCONTROL software
- Alarm functions, triple overtemperature protection and simultaneous display of all parameters provide safety for samples and cell cultures
- Almost exclusive use of high-quality, corrosion-resistant and easy-to-clean stainless steel for both the interior and exterior housing
- Worldwide 3 years manufacturer warranty
Standard devices are safety-tested and bear the signs: CE, VDE, GS, EAC, C MET US
Please select a model.
Load max.:
|
51 - 100 kg101 - 150 kg
|
Width outside (incubators,...):
|
559 mm719 mm759 mm
|
Width inside (incubators,...):
|
400 mm560 mm600 mm
|
Maximum temperature (heat):
|
+ 90 °C
|
Height outside (incubators,...):
|
795 mm850 mm1070 mm1180 mm
|
Height inside (incubators,...):
|
425 mm480 mm700 mm810 mm
|
Interior volume:
|
51 - 100 l101 - 200 l201 - 300 l
|
Cabinet type:
|
Heating-up chamber
|
Depth outside (incubators,...):
|
521 mm591 mm691 mm
|
Depth inside (incubators,...):
|
330 mm400 mm500 mm
|
Lowest temperature (cooling):
|
+ 18 °C
|