Nabertherm furnace system with scale and software, with hinged door - ProfiLab24 GmbH
99
100
24
4
stars -
Professional service
Customer
Young team with a lot of ambition and quick answers to all questions. We needed a complete laboratory equipment for our new location. The team of Profiab24 has arranged everything.
Nabertherm furnace system with scale and software, with hinged door
Item number: NAB_8159
EAN: 4064343428309
Manufacturer:
Nabertherm
starting from
9.481,00 €
Manufacturers suggested retail price:
9.980,00 €
Excluding 19% VAT. ,
plus
(Sperrgut)
(including 19% VAT. 11.282,39 €)
- Model/ Controller
-
There are variations of this item. Please select the variation you wish.
Nabertherm Furnace System with Scale and Software, with Hinged Door L 9/11/SW - L 9/12/SW
This weighing furnace with integrated precision balance and software has been specially developed for the determination of loss on ignition in the laboratory. The determination of the loss on ignition is important, among other things, in the analysis of sewage sludge and domestic waste, but is also used in numerous technical processes to evaluate the results. The difference between the total mass charged and the residue on ignition forms the loss on ignition. During the process, both the temperature and the weight curve are recorded via the software supplied.
- Tmax 1100 °C or 1200 °C
- Heating from two sides
- Ceramic heating plates with integrated heating wire, splash and exhaust gas protected, easy to replace
- Insulation made of non-classified fibre material
- Housing made of textured stainless steel sheets
- Optionally with hinged door (L), which can be used as a shelf, or with lift door (LT) at no extra charge, with the hot side facing away from the operator
- Adjustable air inlet in the door
- Exhaust air opening in the rear wall of the oven
- Silent operation of the heater with solid state relay
- Delivery includes base, ceramic stamp with support plate inside the oven, precision scales and software package
- Choice of 4 scales for different maximum weights and scaling ranges
- Process control and documentation for temperature and loss on ignition via VCD software package for monitoring, documentation and control
Additional equipment
- Exhaust stack, exhaust stack with fan or catalyst
- Over-temperature limit controller with adjustable shut-off temperature for thermal protection class 2 according to EN 60519-2 as over-temperature protection for the furnace and the fabric.
including scale EW-2200 or EW-6200 and software, scale EW-4200 or EW-12000 at extra charge
Width outside (oven):
|
415 mm
|
Width inside (oven):
|
230 mm
|
Height outside (oven):
|
740 mm
|
Height inside (oven):
|
170 mm
|
Power (oven):
|
3 kW
|
Stove appliance type:
|
chamber and muffle furnace
|
Oven volume:
|
9 l
|
Oven temperature max.:
|
1100°C1200°C
|
Depth outside (oven):
|
455 mm
|
Depth inside (oven):
|
240 mm
|
Product weight: |
50,00 Kg |
Dimensions: |
× × cm |
Model
with hinged door |
T max1
[°C]
|
Volume
[l] |
Internal dimensions
W x D x H [mm] |
External dimensions2
W x D x H [mm]
|
Connected load
[kW] |
Electrical
connection* |
Weight
[kg] |
Heating time3
[min]
|
L 9/11/SW |
1100 |
9 |
230 x 240 x 170 |
415 x 455 x 740 |
3,0 |
1-phase |
50 |
65 |
L 9/12/SW |
1200 |
9 |
230 x 240 x 170 |
415 x 455 x 740 |
3,0 |
1-phase |
50 |
75 |
1 Recommended temperature for longer holding times 1000 °C (L 9/11) resp. 1100 °C (L 9/12)
2 External dimensions vary for versions with additional equipment.
3 Approx. heating time of the empty, closed furnace in minutes up to Tmax -100 K (with connection to 230 V 1/N/PE)
* 1-phase: All ovens are available for supply voltages from 110 V to 240 V, 50 or 60 Hz.