Nabertherm High Temperature Furnace with Fibre Insulation

Item number: NAB_8170

EAN: 4064343429443

Category: Nabertherm

Manufacturer: Nabertherm

starting from 22.180,00 €

Manufacturer’s suggested retail price: 22.180,00 €

Excluding 19% VAT. , plus shipping (Sperrgut)

(including 19% VAT. 26.394,19 €)

Model/ Controller

There are variations of this item. Please select the variation you wish.

Request for quote

Professional service

+49 30-403 667 940

International shipping

Description
Technical data

Nabertherm High-Temperature Furnace with Fibre Insulation HT 04/16 - HT 40/18
High-Temperature Furnaces as Floor-Standing Models

Due to their solid construction in a compact floor-standing model, these high-temperature furnaces are suitable for processes in the laboratory where the highest precision is required. Outstanding temperature uniformity and sensible details set unsurpassable quality standards. For the design for your process, the furnaces can be extended from our extensive range of extras.

Tmax 1600 °C, 1750 °C or 1800 °C
Recommended working temperature for models HT ../18 1750 °C; increased wear must be expected at higher working temperatures
Double-walled housing construction with fan cooling, thus low outer wall temperature
Heating from both sides via molybdenum disilicide heating elements
High-quality fibre insulation with special back insulation
Side insulation, constructed from tongue and groove blocks, ensures low heat loss to the outside
Durable ceiling insulation with special suspension
Parallel swing door with chain guide for defined opening and closing of the door
Double door design (front/rear) for high-temperature ovens > HT 276/..
Labyrinth seal ensures lowest possible temperature losses in the door area
Base reinforcement with level stacking support to protect the fibre insulation and to accommodate heavy superstructures as standard from HT 16/16 onwards
Exhaust air opening in the furnace ceiling
Control of heating elements via thyristors
NTLog Basic for Nabertherm controller: recording of process data with USB stick

Additional equipment

Unregulated or regulated cooling system with frequency-controlled cooling fan and motorised exhaust air flap
Furnace in DB design with fresh air preheating, exhaust fan and comprehensive safety package for debinding and sintering in one process, i.e. without transferring the product from the debinding furnace to the sintering furnace.
Stainless steel exhaust bonnets
Special heating elements for sintering zirconium oxide with longer service life with regard to chemical interactions between product and heating elements
Protective gas connection for purging the furnace with non-flammable protective or reaction gases
Manual or automatic gas supply system
Process insert box to improve gas tightness and protect the oven chamber against contamination
Lift door
Motor-driven exhaust air flap, switchable via the programme
Thermal or catalytic exhaust gas cleaning systems
Process control and documentation via VCD software package or Nabertherm Control Center NCC for monitoring, documentation and control

Width outside (oven):	740 mm820 mm985 mm1010 mm1140 mm1250 mm1310 mm1360 mm
Width inside (oven):	150 mm200 mm275 mm300 mm400 mm500 mm
Height outside (oven):	1755 mm1860 mm1990 mm2040 mm2240 mm2290 mm2570 mm
Height inside (oven):	150 mm260 mm350 mm400 mm550 mm780 mm
Power (oven):	8,5 kW9,8 kW12.5 kW18,5 kW21,5 kW26,5 kW36,5 kW65 kW
Stove appliance type:	high temperature furnacechamber and muffle furnace
Oven volume:	8 l16 l29 l40 l64 l128 l160 l276 l450 l
Oven temperature max.:	1600°C1750°C1800°C
Depth outside (oven):	640 mm690 mm740 mm800 mm890 mm1040 mm1280 mm1600 mm1800 mm
Depth inside (oven):	300 mm350 mm400 mm550 mm800 mm1000 mm1150 mm

Model	T max [°C]	Volume [l]	Internal dimensions W x D x H [mm]	External dimensions¹ W x D x H [mm]	Connected load [kW]	Electrical connection*	Weight [kg]
HT 08/16	1600	8	150 x 300 x 150	730 x 640 x 1755	8,5	3-phase2	215
HT 16/16	1600	16	200 x 300 x 260	820 x 690 x 1860	12,5	3-phase2	300
HT 29/16	1600	29	275 x 300 x 350	985 x 740 x 1990	9,8	3-phase2	340
HT 40/16	1600	40	300 x 350 x 350	1010 x 800 x 1990	12,5	3-phase	420
HT 64/16	1600	64	400 x 400 x 400	1140 x 890 x 2040	18,5	3-phase	555
HT 128/16	1600	128	400 x 800 x 400	1140 x 1280 x 2040	26,5	3-phase	820
HT 160/16	1600	160	500 x 550 x 550	1250 x 1040 x 2240	21,5	3-phase	880
HT 276/16	1600	276	500 x 1000 x 550	1310 x 1600 x 2290	36,5	3-phase	1300
HT 450/16	1600	450	500 x 1150 x 780	1360 x 1800 x 2570	65,0	3-phase	1450

HT 08/17	1600	8	150 x 300 x 150	730 x 640 x 1755	8,5	3-phase2	215
HT 16/17	1600	16	200 x 300 x 260	820 x 690 x 1860	12,5	3-phase2	300
HT 29/17	1600	29	275 x 300 x 350	985 x 740 x 1990	9,8	3-phase2	340
HT 40/17	1600	40	300 x 350 x 350	1010 x 800 x 1990	12,5	3-phase	420
HT 64/17	1600	64	400 x 400 x 400	1140 x 890 x 2040	18,5	3-phase	555
HT 128/17	1600	128	400 x 800 x 400	1140 x 1280 x 2040	26,5	3-phase	820
HT 160/17	1600	160	500 x 550 x 550	1250 x 1040 x 2240	21,5	3-phase	880
HT 276/17	1600	276	500 x 1000 x 550	1310 x 1600 x 2290	36,5	3-phase	1300
HT 450/17	1600	450	500 x 1150 x 780	1360 x 1800 x 2570	65,0	3-phase	1450

HT 08/18	1600	8	150 x 300 x 150	730 x 640 x 1755	8,5	3-phase2	215
HT 16/18	1600	16	200 x 300 x 260	820 x 690 x 1860	12,5	3-phase2	300
HT 29/18	1600	29	275 x 300 x 350	985 x 740 x 1990	9,8	3-phase2	340
HT 40/18	1600	40	300 x 350 x 350	1010 x 800 x 1990	12,5	3-phase	420
HT 64/18	1600	64	400 x 400 x 400	1140 x 890 x 2040	18,5	3-phase	555
HT 128/18	1600	128	400 x 800 x 400	1140 x 1280 x 2040	26,5	3-phase	820
HT 160/18	1600	160	500 x 550 x 550	1250 x 1040 x 2240	21,5	3-phase	880
HT 276/18	1600	276	500 x 1000 x 550	1310 x 1600 x 2290	36,5	3-phase	1300
HT 450/18	1600	450	500 x 1150 x 780	1360 x 1800 x 2570	65,0	3-phase	1450

¹ External dimensions vary for versions with additional equipment.
² Heating only between two phases
* 3-phase: All ovens are available for supply voltages from 200 V to 240 V or 380 V to 480 V, 50 or 60 Hz.

Note: All models include automatic exhaust air flap control and extractor hood.