Nabertherm Sintering Furnace LT 02/13 CR for Cobalt-Chromium
The sintering furnace LT 02/13 CR is perfectly suited for sintering of cobalt-chromium restorations. The blanks are placed in a special sintering bell and will be heat-treated under argon. The specific design in combination with sintering pearls provides for good sintering results in a nearly oxygen-free atmosphere at very low argon consumption.
The system is open and can be programmed for various materials up to sintering temperatures of 1300 °C. Two preinstalled sample programs, which can be adjusted individually. Furthermore, the sintering furnace LT 02/13 CR is designed for a single-phase connection.
- Tmax 1300 °C
- Working temperature up to 1280 °C, depending on the CoCr material
- Single-phase connection
- Furnace chamber insulation made of non-carcinogenic fiber materials
- Double-walled housing made of textured stainless steel provide for low surface temperatures
- Gas supply system with solenoid valve and flow meter
- Forced cooling system with compressed air
- Sintering bell with good sealing for sintering up to 30 single crowns under argon
- Sintering pearls, Ø 1.25 mm (200 g) included in delivery scope
- Special tongs included in the delivery scope
- Type S thermocouple
- Controller C450 allows for automatic temperature control and switching of the gas flow
- Switching system with solid-state-relays to switch the heating
- Two different gas flows can be set for the optimal adaptation to the sintering cycle
- Defined application within the constraints of the operating instructions
- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
Additional equipment
- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
- Process control and documentation via VCD software package for monitoring, documentation and control
Controller: C450
Please tell us in your order, which main voltage you need.
|
Width outside (oven):
|
422 mm
|
|
Width inside (oven):
|
130 mm
|
|
Height outside (oven):
|
430 mm
|
|
Height inside (oven):
|
120 mm
|
|
Power (oven):
|
2,2 kW
|
|
Stove appliance type:
|
sintering furnace
|
|
Oven volume:
|
1,9 l
|
|
Oven temperature max.:
|
1300°C
|
|
Depth outside (oven):
|
320 mm
|
|
Depth inside (oven):
|
120 mm
|
| Product weight: |
25,00 Kg |
Model
|
Tmax
°C |
Inner dimensions
W x D x H [mm] |
Volume
[l] |
Maximum
units |
Outer dimensions
W x D x H1 [mm]
|
Connected
load [kW] |
Electrical
connection2
|
Weight
[kg] |
Minutes
to Tmax4
|
| LT 02/13 CR |
1300 |
130 x 120 x 120 |
1,9 |
30 |
422 x 320 (4303) x 430 + 230 |
2,2 |
1phasig |
25 |
35 |
1 Including opened lift door
2 These furnaces are available for main voltage of 110 V - 120 V, 200 V, 208 V, 220 V - 240 V, 1/N/PE or 2/PE
3 Including compressed air connection for forced cooling
4 If connected at 230 V 1/N/PE
