ENVAIR in vitro fertilization workbench eco air IVF
Mobile Laminar Flow Workbench, Usable area: (W x D x H): 600 x 670 x 610 mm (Variant 1) (W x D x H): 720 x 1049 x 958 mm (Variant 2) (W x D x H): 960 x 1150 x 1280 mm (Variant 3) (W x D x H): 960 x 1200 x 1530 mm (Variant 4)
Horizontal LAF-Trolleys are used for storage and transport of products which muct be protected against contamination between two areas which normally are separated by an Autoclave.
The independent power supply UPS allows a laminar airflow of class ISO 5 (NF, EN, ISO 14644-1) which flows horizontally from the plenum to the charging door, thus flushing the area in which the products are stored (on shelves and shelve rails), producing a constant positive pressure and eliminating the risk of cross-contamination.
The trolleys are fitted with an independent power supply which keeps the laminar flow constant at any time. The charging condition of the battery is indicated by a charge control.
Housing: Body structure fully made in stainless steel AISI 304L 4B (Scotch Brite finishing) press-bent metal sheets with radius of 3 mm for easy cleaning and roughness lower than 0.8 Ra.
Filter: Filtration stages consisting of G3 pre-filter with typical arrestance of 80 = Am > 90 according to EN 779 fitted on stainless steel cell with quick release system (no screws needed to remove the panel) and low pressure drop H13 HEPA filter according to CEN EN 1822.
Ventilation: Ventilation provided by energy efficiency low power consumption EBM Papst motorblower.
Power supply: Dry battery UPS recovery pack with theoretical battery duration of 100 minutes starting from full charge status. UPS unit is provided with charge indicator (UPS must be plugged for recharging anytime in order to keep the always close to full charge status battery).
Mobility: Pivoting (360°) castors with brakes.
Construction: Side and top windows made in stainless steel or 8 mm safety glass as per customer request. Stainless steel internal shelves to lean trays (trays not included in standard package, total number of shelves depends on the internal useful height and may vary upon customer request). Front and rear resin handle bars. Frontal hinged or removable stainless steel panel with closing handle. Backlit main switch.
Available sizes (Usable area):
(W x D x H): 600 x 670 x 610 mm (Variant 1)
(W x D x H): 720 x 1049 x 958 mm (Variant 2)
(W x D x H): 960 x 1150 x 1280 mm (Variant 3)
(W x D x H): 960 x 1200 x 1530 mm (Variant 4)
Accessories on request!
Customizing services (Selection)
- 24h at site service and 24h free of charge phone hotline, 7 days a week
- 10 years Spare parts guaranty. Availability within 24h
- Qualification: IQ/OQ, GMP, GAMP and 21 CFR Part 11
- We offer a 2-year warranty to all units (with maintenance contract)
