This makes measuring tasks fun again!
Here in our online catalogue you will find high-quality measuring instruments such as force gauges, moisture analyzers, data loggers and many other compact and mobile devices for analyses and investigations. The modern technology of the PCE Instruments Crowcon Gasman-CL2 for chlorine helps you to perform very accurate measurements and to get very precise values. A stable housing but also the mode of operation guarantee quality and durability of the CL2. Convince yourself of additional useful features such as a high degree of flexibility due to the compact design and a modern data acquisition and/or storage... At the same time, depending on the version, you can count the following points among the equipment:
- a selection and setting of various measuring times
- a user-friendly control system
- the possibility to add programmes for monitoring
- a safe and watertight design
- and, depending on the model, much more. We will be happy to advise you on this.
Discover the technical features of the CL2
In addition to good handling, the controlled acquisition of information for analyses in numerous fields of application in the laboratory and industry also plays a relevant role. This model works quickly and precisely and provides you with reproducible measurement results for your field of research. Like many of the manufacturer's other measuring instruments, the CL2 is battery- and/or accumulator-powered, making it easy to transport. Discover all technical features at a glance:
Measurement technology type: hand-held measuring device, industrial safety measuring device, gas measuring deviceDisplay: LCD, backlitWeight: 130 g (with batteries)Dimensions (in mm): 90 x 48 x 24Housing material: IP 65 / 67Power supply: Battery
You need more features for the CL2 from PCE Instruments?
We will be happy to advise you!
Our expert team of consultants will ensure that you get the right materials for your requirements. Do you have any questions about our different versions, their features or the respective manufacturers?
We look forward to hearing from you and will be happy to help! You can reach us by phone at +49 (0)30-403 667 940 or by e-mail at [email protected].
|
Dimensions (in mm):
|
90 x 48 x 24
|
|
Alarm signal:
|
Vibrationopticalacoustic
|
|
Display (metrology):
|
backlitLCD
|
|
Housing (metrology):
|
IP 65 / 67
|
|
Weight, approx.:
|
130 g (with batteries)
|
|
Measurement type:
|
Gas measuring deviceOccupational safety and health measuring deviceHand-held measuring instrument
|
|
Standards:
|
EN 50082-2EN 50081-2EN 50020IEC 801-3EN 50018IEC 61508EN 50014Ex95Y1350EEx ia (d) IIC T3 or T4Ex95C2348XATEX II 2G EEx ia d IIC T4Ex65C2349ATEX II 1G EEx ia IIC T4EN 61779EN 55022EN 50721Class B
|
|
Interfaces:
|
Charging station (for charging batteries)
|
|
Power supply via:
|
Battery
|
| Shipping weight: |
1,13 Kg |
| Product weight: |
0,13 Kg |
| Dimensions: |
× × cm |
| PCE Gas Detector |
Crowcon Gasman-CL2 for chlorine |
| Typical measurement ranges and alarm settings |
|
| Parameters / Gas |
Range / Alarm |
| Chlor CL2 |
0 to 20 ppm |
|
0.5 ppm |
Sensors
(the sensors are interchangeable) |
Response time (T90) / lifetime
|
| Methane |
Response time (T90): 20 s |
|
Lifetime: 5 years |
| Toxic |
Response time (T90): 20 s |
|
Lifetime: 3 years |
| Oxygen |
Response time (T90): 10 s |
|
Lifetime: at least 1 year |
| Audible alarms |
85 dB (A) at 1 m distance, tone sequence adjustable |
|
Regular control tone, can be switched off |
|
Continuous tone in case of too low battery voltage at the industrial safety measuring device |
| Optical alarm |
special bright LED line, flashing |
|
Indication of the alarm type on the display |
|
Green LED with low flashing frequency as operation indicator |
| Vibration alarm |
In addition to the visual and audible warning, the industrial safety measuring device vibrates |
| Display |
high-contrast, backlit LCD |
|
Line height 10 mm |
|
Icons für: Max-Hold, Batt-Low, Calibration Zero, Alarm 1 and 2, 15 min and
the 8 h TWA alarm |
Measurement memory
|
Adjustable detection interval, maximum capacity of 900 h continuous measurement at a
measurement rate of one minute (depending on the gas concentration) |
| Power supply |
Toxic gas and oxygen lithium battery (replaceable) |
|
(24 months intermittent use) |
|
Flammable gases and hydrogen for charging, the charging station is benöted. |
|
2 nickel hydride cells (rechargeable), 8 to 10 h operating time |
| Environmental conditions |
-20 to +55 °C |
|
0 to 99% RH non-condensing |
| Gehäuseklasse |
IP 65 / 67 |
| Dimension |
90 x 48 x 24 mm (H x W x D) |
| Weight |
maximum 130 g (including batteries) |
| Standards/ Codes |
EN50014, EN50020, EN50018, EN55022 |
|
Class B, EN50081-2, Ex95C2348X, |
|
Ex65C2349, Ex95Y1350, IEC801-3, |
|
EN50082-2, IEC61508, EN61779, EN50721 |
| Approval |
EEx ia (d) IIC T3 or T4 |
|
ATEX II 1G EEx ia IIC T4 (-20 to +55 °C) |
|
(Toxic & Oxygen sensors) |
|
ATEX II 2G EEx ia d IIC T4 (flammable gases) |
|
A standard software is available as an accessory for configuration and calibration as well as for setting
the alarm limits and, in the case of data logger function, also for reading out all values stored
in the industrial safety measuring device. This software displays the data graphically or in tabular form. An
export to other programs is möglich. |
| PC interface |
Please note: |
|
To Übertragen the data, the combined charging station acts as an interface, i.e. the charging station
is used to charge the batteries at the Arbeitsschutzmessgerät für ''combustible gases'' + ''hydrogen''
and as an interface to the PC at all other models. |
Maintenance and recalibration
| .
You can send in the industrial safety measuring device to us (depending on the specification of your ISO manual) for maintenance and
calibration (e.g. every six months). |
|
The industrial safety meter is then disassembled, cleaned and recalibrated. If a sensor is no longer
calibrated or has reached the end of its service life, you will first be informed.
Replacement sensors are also on offer. |
This industrial safety measuring device is approved according to ATEX. What does this mean?
ATEX product directive (also unofficially referred to as ''ATEX 95'', because of the relevant Art. 95 of the EC Treaty über den freien Warenverkehr) of the European Parliament
and of the Council on the approximation of the laws of the Member States concerning an industrial safety measuring instrument or protective system intended for use in
explosive atmospheres lays down the rules for the placing on the market of products used in such atmospheres. The directive contains in Annex II the
basic health and safety requirements, which must be observed by the manufacturer and then
proved by an appropriate conformity assessment procedure. Our health and safety measuring device complies with all current EU standards.
Scope of delivery: see selected variation
