FRITSCH PULVERISETTE 13 Disk MillFRITSCH Jaw Crushers are ideal for pre-crushing of hard and very hard brittle materials. The sample is crushed under high pressure between one fixed and one movable crushing jaw. The FRITSCH Disk Mill PULVERISETTE 13 grinds the material by pressure and shearing action between two counteracting grinding disks with coarse interlocking teeth. It is suitable for fine grinding of hard-brittle and medium-hard solids. The Vibrating Cup Mill PULVERISETTE 9 is ideal for grinding hard, brittle and fibrous materials to analytical fineness.
Disk Mill PULVERISETTE 13: For batch-wise or continuous fine grinding of hard-brittle to medium-hard solids.
Areas of applicationMining and metallurgy, ceramics industry, rocks and soils, glass industry, soil research
Method of operationThe grinding material is comminuted by pressure and shearing loads between two counteracting grinding disks with coarse interlocking teeth. The gap between the two grinding disks can be adjusted externally - even during operation - and determines the fineness of the end product. Pre- and fine crushing is also possible in one step, because the Disk Mill PULVERISETTE 13 can be combined with the Jaw Crusher PULVERISETTE 1.
Features
- High throughput up to 150 kg/h
- Fine grinding down to 0.1 mm
- Fast, easy cleaning
- Simple operation
- Fast grinding disk change
- Precision setting of the final fineness even during grinding
- High service life due to generously dimensioned bearings
- Combinable with the Jaw Crusher PULVERISETTE 1
- Certified safety (CE mark)
- 2-year warranty
Equipment
The standard equipment delivered with the Disk Mill PULVERISETTE 13 does not include grinding disks. Grinding disks are offered in 4 different materials and must be ordered as accessories.
Especially for iron-free grinding, the Disk Mill PULVERISETTE 13 can be ordered with a complete polymer coating inside of the grinding chamber. The polymer coating has to be ordered separately.
Suitable for the following material sampleshard-brittle and medium-hard solids
Please note: For this FRITSCH model, you require at least one fixed and one movable grinding disk of your choice. The grinding disk material must also be harder than the material to be ground. In normal cases, the grinding disks are made of the same material.
Mills Appliance type:
|
disc mill
|
Process type:
|
inlinebatch
|
Shipping weight: |
170,00 Kg |
Product weight: |
130,00 Kg |
Dimensions: |
× × cm |