FRITSCH PULVERISETTE 25 / PULVERISETTE 19 Cutting Mill Combination

FRITSCH PULVERISETTE 25 / PULVERISETTE 19 Cutting Mill Combination
Cutting mills comminute the sample by cutting and shearing forces. They are ideal for comminution of soft to medium-hard, fibrous and tough materials, plastics and heterogeneous mixtures. The FRITSCH-Plus: unbeatable quick and easy cleaning - all grinding parts can be removed in a few seconds without tools.


Cutting Mill Combination PULVERISETTE 25 / PULVERISETTE 19: Suitable for comminution of extremely heterogeneous samples. Max. feed size: 120 x 85 mm

Areas of application
The Cutting Mill Combination can comminute samples of up to 2 litres in one step from 30 mm down to a final fineness of < 500 µm. A representative portion for analysis is available within 5 minutes. The combination is used, among other applications, for the preparation of heterogeneous substances for analysis according to the Technical Instruction on Municipal Waste Management (TOC) or for determination of calorific value and chlorine content. Even completely heterogeneous samples such as household waste, construction waste, German recycling system bales or light shredder fractions from automobile recycling can be prepared.

Method of operation
The Cutting Mill Combination consists of the Power Cutting Mill PULVERISETTE 25 and the Universal Cutting Mill PULVERISETTE 19. The entire sample is pre-ground in the PULVERISETTE 25. The pre-ground sample falls through a funnel into the sample divider, which by default divides the sample in a ratio of 1 : 13. The dividing ratio is variable.

Features overview

• Fully automatic two-stage comminution
• Sample extraction via cyclone into the sample glass
• No tools required for removing the grinding parts
• Minimal dead spaces
• Integrated sample dividing for quantity reduction to achieve the finest comminution
• Cooling of the sample during grinding
• Permissible sample moisture content of up to 30%
• High material throughput

Equipment
The Cutting Mill Combination offered under article number 19.5030.00 is a Standard Cutting Mill Combination that was put together for universal use. It consists of: Power Cutting Mill PULVERISETTE 25 with 3-litre feed funnel, Universal Cutting Mill PULVERISETTE 19, intermediately positioned sample divider, base frame and sample extraction via cyclone, including hardmetal tungsten carbide cutting tool sets and sieve cassettes of stainless steel.
The Cutting Mill Combination PULVERISETTE 25/PULVERISETTE 19 can be fitted with any type of cutting tool sets and sieve cassettes that are offered for the PULVERISETTE 25 and PULVERISETTE 19. This allows the user to individually equip the Cutting Mill Combination specifically for the respective application.

Suitable for the following material samples
medium-hard, brittle, tough, fibrous samples