IKA Laboratory reactor LR 1000 control System

Dispersing element S 25 KV - 18 G for laboratory reactors and IKA Disperser T 25 digital

Dispersing element S 25 KV - 25 F for laboratory reactors and IKA Disperser T 25 digital

Dispersing element S 25 KV - 25 G  for laboratory reactors and IKA Disperser T 25 digital

IKA RS 232 Server PC 4.1

Up to 4 lab units can be controlled through the ethernet with the PC 4.1 RS 232 server.
The server supports 4 RS 232 ports with a 10/100 mbps ethernet interface by TCP/IP. The server can be set-up through the ethernet and works as a transparent serial COM-Port without restrictions of platform and distance.
Server for connection of up to 64 instruments available on request.

• Anchor stirrer LR 1000.11
• Material of seal: FKM
• Lid equipped with: 3x NS 14 receptacles,1x NS 29, including 2x NS 14, 1x NS 29 ground-in glass stoppers and clamps, 1x NS 14 ground joint for vacuum valve
• Max Volume: 1000 ml
• Material in contact wit medium: AISI 316L, borosilicate glass 3.3,PTFE, FKM
• Max. working temperature of product inside the vessel: 120 °C

IKA Temperature sensor PT 100.30

Temperature sensor
Material: Stainless steel
Length: 250 mm
Max. Temperature: 300 °C

Min. usable volume when homogenizing: 300 ml

Min. usable volume when homogenizing: 500 ml

Flow breaker / baffle LR 1000.20

pH-Electrode LR 1000.64

pH Electrode receptacle LR 1000.65

Shaft receptacle LR 1000.41 to install the dispersing elements S 25 KV, material of seal: FKM

Sensor receptacle LR 1000.61 to install the temperature sensors PT 100.25 and PT 100.5, material of seal: FKM

Plug-in card PCI 8.2 for mounting in the PC to connect up to 8 instruments simultaneously. Plug-in cards for up to 64 instruments available on request.

IKA Magnetic valve MV 1

Magnetic valve for cooling water control, max 100 °C, max. 10 bar
Connection: for M16x1 hose olives
2 hose connectors DN 8 and union nuts for assembling included.

IKA Vacuum controller VC 10

Universal vacuum controller for a two-point calibration of multiple vacuum sources. It comes with a chemo resistant ceramic pressure sensor.
The high-resolution TFT display ensures intuitive operation and navigation. The ventilation valve works even during a power outage and aerates the vacuum chamber. In addition to the manual mode, up to 10 programs can be saved, with up to 10 pressure/time sequences, even allowing for saving the last experiment run. It is possible to manage the experiment via labworldsoft (RS 232 interface) and to connect an external PT 1000 temperature sensor to measure the temperature of all applications. The knob also emergency stops the controller and aerates the vacuum chamber.
The longevity of the valves is supported by the cleaning function which can be adjusted for every application. The operation of the vacuum controller is facilitated by a choice of languages (menu).
The firmware of the device can be regularly updated with the free Firmware Update Tool (via USB).

IKA High speed stirrer S 25 KV - 26 LR

For rapid mixing, dissolving, and disagglomerating pigment agglomerates.
Dissolver disc with 26 mm diameter
Immersion depth: 180 mm
Material: stainless steel (AISI 316L)

IKA Software labworldsoft 6 Pro

labworldsoft is a laboratory software to control lab devices, automate processes, and to document your measurements and results. The software provides access to a huge library of different laboratory devices. labworldsoft does not integrate only IKA laboratory devices, but supports several other device from different manufacturers as well. You stay flexible in the choice of your lab devices you want to use and profit from the whole device range of the laboratory world.
The communication between PC and lab device can be realized over different communication interfaces like RS232, USB, Bluetooth or network.
labworldsoft allows an easy recording of various physical parameters like torque, temperature, speed and pH-value, etc.. For better analyzation and documentation, those values can be displayed in different ways. For example in a y/t-diagram.

One Software. Unlimited Possibilities.
The amount of applications, set ups and processes where laboratory devices are used is unlimited. Through its flexibility and the huge device library, labworldsoft has a solution for every problem. You can create different configurations for different applications. You do not need any other software, for your daily work in your laboratory. The entire Laboratory world in one software. That is Labworldsoft.

Compatibility
No other laboratory software in the world is out of the box compatible with such a huge range of different lab devices as labworldsoft. More than 300 lab devices from more than 40 manufacturers are already implemented in labworldsoft or will be part of labworldsoft in the future. Are you missing one of your devices in our device library? No problem! If your device has a communication interface, we can integrate it anytime.

Flexibility
Through the large amount of different function modules, you can realize any configuration for your laboratory setups. The interaction between the various function modules and the lab devices allows the highest possible dynamic and flexibility for permanently changing requirements in the daily work in the laboratory world. For instance, you can control your processes time based or event based.

Automation
Using function modules, you can create time triggered or event triggered configurations for you laboratory processes. You can connect your lab devices using logical functions to build a more complex system. In this way, you can realize automated running processes.

Recording.Documentation.Exporting
labworldsoft enables users to a quickly record many physical parameters that are required in the laboratory, such as pH, conductivity, temperature, torque, weight, flow rates, etc.. For documentation purposes, all measuring results as well as the measurement flowcharts can be printed or plotted according to GLP, ISO and QA.
Data acquired in labworldsoft can be exported into standard applications. For example, it is possible to measure the speed during a test, save the resultant data in a standard format (.txt or ASCII) and then analyze in any chart calculation, i.e. Excel.

Supported formats:

• .csv
• .xslx
• ASCII (labworldsoft 5 data format)

Reproducing
Do your test arrangements repeat themselves? With labworldsoft, all test arrangements can be stored. The stored data is available to reproduce the test, with a mouse click. The reproducibility of tests is warranted within the scope of ISO 9000 and within GLP.

Support
labworldsoft shall make your daily work easier. Therefore, we want to support you in any cases. Are you missing a device in our library? We can implement it for you. Are you facing problems to create your configuration in labworldsoft? We will help you - even at your site.

Hard- and Software Requirements
Processor: Intel Core i5 Processor (Suggested Intel Core i7 Processor) frequency not less than 2.6 GHz, not less than 2 Cores
Operating system: Windows 7 / 8.1 / 10 (32-bit and 64-bit operating system)
RAM: Not less than 8 GB // Suggested 16 GB
Storage: At least 10 GB free hard disk
Graphic card: No special requirements
Optical drive: DVD / CD drive - not necessary
Interfaces: USB: At least 4 ports // Suggested: 6 ports, Wifi / LAN: Yes (1 port is enough)
Communication Interfaces for laboratory device communication: For special purposes it is possible to use adapters to provide different communication  
  interfaces on your PC. (e.g. 1 x USB-port to 4 x RS232-ports). This depends on the number of used devices and the device types respectivly the provided 
  communication interfaces of the devices
Mouse and Keyboard: Necessary, no special requirements
Suggested Monitor: At least 24'', with a resolution of at least 1920 x 1080 pixels

After activation of the software you can use labworldsoft 6 continuously. You can install and benefit from updates for 1 year. If you want to work with further updates after 1 year, you need to extend your license by updating it.

labworldsoft 6 Pro Update
From activation on, you can use further updates for another 1 year.
Price: 20 % of the regular price for a labworldsoft 6 Pro license.

IKA Software labworldsoft 6 Starter

labworldsoft is a laboratory software to control lab devices, automate processes, and to document your measurements and results. The software provides access to a huge library of different laboratory devices. labworldsoft does not integrate only IKA laboratory devices, but supports several other device from different manufacturers as well. You stay flexible in the choice of your lab devices you want to use and profit from the whole device range of the laboratory world.
The communication between PC and lab device can be realized over different communication interfaces like RS232, USB, Bluetooth or network.
labworldsoft allows an easy recording of various physical parameters like torque, temperature, speed and pH-value, etc.. For better analyzation and documentation, those values can be displayed in different ways. For example in a y/t-diagram.

One Software. Unlimited Possibilities.
The amount of applications, set ups and processes where laboratory devices are used is unlimited. Through its flexibility and the huge device library, labworldsoft has a solution for every problem. You can create different configurations for different applications. You do not need any other software, for your daily work in your laboratory. The entire Laboratory world in one software. That is Labworldsoft.

Compatibility
No other laboratory software in the world is out of the box compatible with such a huge range of different lab devices as labworldsoft. More than 300 lab devices from more than 40 manufacturers are already implemented in labworldsoft or will be part of labworldsoft in the future. Are you missing one of your devices in our device library? No problem! If your device has a communication interface, we can integrate it anytime.

Flexibility
Through the large amount of different function modules, you can realize any configuration for your laboratory setups. The interaction between the various function modules and the lab devices allows the highest possible dynamic and flexibility for permanently changing requirements in the daily work in the laboratory world. For instance, you can control your processes time based or event based.

Automation
Using function modules, you can create time triggered or event triggered configurations for you laboratory processes. You can connect your lab devices using logical functions to build a more complex system. In this way, you can realize automated running processes.

Recording.Documentation.Exporting
labworldsoft enables users to a quickly record many physical parameters that are required in the laboratory, such as pH, conductivity, temperature, torque, weight, flow rates, etc.. For documentation purposes, all measuring results as well as the measurement flowcharts can be printed or plotted according to GLP, ISO and QA. Data acquired in labworldsoft can be exported into standard applications. For example, it is possible to measure the speed during a test, save the resultant data in a standard format (.txt or ASCII) and then analyze in any chart calculation, i.e. Excel.

Supported formats:

• .csv
• .xslx
• ASCII (labworldsoft 5 data format)

Reproducing
Do your test arrangements repeat themselves? With labworldsoft, all test arrangements can be stored. The stored data is available to reproduce the test, with a mouse click. The reproducibility of tests is warranted within the scope of ISO 9000 and within GLP.

Support
labworldsoft shall make your daily work easier. Therefore, we want to support you in any cases. Are you missing a device in our library? We can implement it for you. Are you facing problems to create your configuration in labworldsoft? We will help you - even at your site.

Hard- and Software Requirements
Processor: Intel Core i5 Processor (Suggested Intel Core i7 Processor) frequency not less than 2.6 GHz, not less than 2 Cores
Operating system: Windows 7 / 8.1 / 10 (32-bit and 64-bit operating system)
RAM: Not less than 8 GB // Suggested 16 GB
Storage: At least 10 GB free hard disk
Graphic card: No special requirements
Optical drive: DVD / CD drive - not necessary
Interfaces: USB: At least 4 ports // Suggested: 6 ports, Wifi / LAN: Yes (1 port is enough)
Communication Interfaces for laboratory device communication: For special purposes it is possible to use adapters to provide different communication
  interfaces on your PC. (e.g. 1 x USB-port to 4 x RS232-ports). This depends on the number of used devices and the device types respectivly the provided
  communication interfaces of the devices
Mouse and Keyboard: Necessary, no special requirements
Suggested Monitor: At least 24'', with a resolution of at least 1920 x 1080 pixels

You can choose 3 device type series, you like to work with, from the device library. The number of devices on the workspace is limited to 3.

After activation of the software you can use labworldsoft 6 continuously. You can install and benefit from updates for 1 year. If you want to work with further updates after 1 year, you need to extend your license by updating it.

labworldsoft 6 Starter Update
From activation on, you can use further updates for another 1 year.
Price: 20 % of the regular price for a labworldsoft 6 Starter license.

IKA Holder MV 1

The holder can be easily mounted to the support rod of the LR 1000 control and ensures a secure fastening of the magnetic valve MV 1.

IKA Laboratory reactor vessel LR 1000.3

The LR 1000.3 reactor vessel comes with the anchor stirrer with scrapers.

Metals in contact with medium: stainless steel ( ALSI 316 L), FFKM, PTFE, PEEK, borosilicate glass 3.3
Standard joint fittings on the lid: 2x NS 29, 2x NS 14, 2 x GL 14 for flexible adaptation of further equipment

IKA Lid Holder LR 1000.70

Lid holder for fixation of the lid on the stand