Item number: ELGA_21057

EAN: 4064343193368

Category: ELGA

Manufacturer: VWS Deutschland

starting from 7.318,80 €

Manufacturer’s suggested retail price: 7.704,00 €

Excluding 19% VAT. , plus shipping (Standard)

(including 19% VAT. 8.709,37 €)

There are variations of this item. Please select the variation you wish.


The BIOPURE 7/15 is a compact system able to fit under or on a bench or wall mounted. Utilizing integrated purification technologies it delivers purified water at the point of use for washer disinfectors and autoclaves to minimize the contamination risk to patients.

  • Delivers up to 7 liters an hour of compliant water
  • Meets the latest medical standards (EN15883, HTM2030/2031, NHS MESc32, MDA/HIS, ISO 15883 part 4, EN285)
  • Low running costs are comparable to bottled water costs
  • Guaranteed bacterial specification, provided by integrated purification technologies
  • Compact size makes it suitable to be installed under a bench, mounted on a wall or fitted into a cabinet
  • Full service and validation support

To operate a system BIOPURE a tank with 5 level switches is required.

Booster pump: withoutwith
Storage tank - tank: without
Water source: from the water mains
Power: 7,5 l/h
Water treatment type: pure water system
Shipping weight: 25,00 Kg
Product weight: 20,00 Kg
Treated Water Specifications
Make-up rate at15°C 7 l/hr
Delivery flow rate - maximum 2 l/min at 15psi (1bar)
Inorganics (conductivity at 25°C) <1 µS/cm
Bacteria - typical <1 CFU/10ml1)
Endotoxin <0.25 EU/ml
Dimensions and weights
Dimensions Height 460mm (18.1in)
Width 550mm (21.7in)
Depth 270mm (10.6in)
Operational weight 20Kg
Installation Bench/Wall2)
Feedwater Requirement
Source Tap water as detailed below
Conductivity <1400 µS/cm
Hardness <250 ppm as CaCO3
Free chlorine 0.5 ppm
Chloramine <0.2 ppm
Silica <30 SiO2 ppm
Fouling index <10 FI
Iron/manganese <0.2 ppm
Organics N/A
Temperature 4 - 40°C
(Recommended 15 - 25°C)
Flowrate (requirement at 15°C) 1.3 l/min
Drain requirements (gravity fall with air gap) 1.2 l/min
Feedwater Pressure
Maximum without internal boost pump 90psi (6.0bar)
Minimum without internal boost pump 60psi (4.0bar)
Maximum with internal boost pump 30psi (2.0bar)
Maximum without internal boost pump Flooded Suction
Electrical Requirements
Mains Input 100-240V ac, 50-60Hz
System control voltage (not including pumps and UV) 24V dc
Power consumption with boost pump 80VA
Power consumption without boost pump 50VA
Electrical protection rating 13 amp supply with suitable ELB
Noise level <45 dBA

1)System to be installed and regularly disinfected following ELGA LabWater installation design guidelines. Sample to be taken from hygienic sample valve and sampled in accordance with ELGA LabWater guidelines.
2)Install in a properly ventilated area.